Top » Catalog » Hardware » Smoke/Rocketry/Fireworks » RKL7070

59.90EUR

Remote electric ignition system
[RKL7070]

Remote electric ignition system, suitable for smoke bombs, ignition systems and similar elements. In the development of the ignition switch has been placed top priority on safety. It is ideally suited to ignite bridge detonators. These can also be more connected in series and thus simultaneously be triggered several detonators. A test current indicates whether the external power supply is connected. The external power supply can be 1.5 - 12 volts.

Details:
L x W x H: 33.5 mm x 21.6 mm x 4.7 mm
Test current: <10 µA
Maximum load current (ignition current): 5 A
Short-circuit detection: current> 5 A; time> 0.2 sec
D. delay Remote control: 0.5 sec
Firing delay: 1.2 seconds
Power Ignition: 9-V block (alkaline)
Alternative power: 1.5 - 12 Volts
Power electronics: <8 mA
Number of fuses: no limit
Tension per bridge Fuse: 2 V
Weight without cable: 8 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Red smoke bombs AX-60 (5 pcs) temporarily out of stock	Wing tips support for AX-18/AX-60 (2 pcs) temporarily out of stock	AX-60 starters (5 pcs) temporarily out of stock
Black smoke bombs AX-60 (5 pcs) temporarily out of stock	Yellow smoke bombs AX-60 (5 pcs) temporarily out of stock	Ventral support for AX-18/AX-60 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
22.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Buy Perforated film 100 cm / 20 m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS 500 x 400 x 1 mm (white)
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Buy Perforated film 100 cm / 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 498x247x2.0 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 250 mm (2 pcs)
2 x	20x1000 mm Ring Strap Back To Back
2 x	SE Ring 450 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	20x200 mm battery rings
1 x	Tape GFK 50 mm
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x
1 x	SE Ring 300 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Tape GFK 25 mm
3 x	Foil for sticking flaps and ailerons
2 x	SE Ring 360 mm (2 pcs)
1 x	Red smoke canister 100 g
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	3l Smoke oil
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Glass fibre braided sleeve (45mm) roll 10m
1 x	White smoke canister 140 g
1 x	"S" set for boats
1 x	Blue smoke canister 100 g
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Smoke set "S"
1 x	AX-60 starters (5 pcs)
1 x	12.7 mm 2:1 black termoretract tube
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Oracover Azul Cielo 2 m
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	19 mm 2:1 black termoretract tube
1 x	Oracover CARBON Metalic 1 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Oracover Black 10 m
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Oracover Brown 2 m
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	ORACOVER Ferrari red (2 m)
1 x	Release wax 250ml
1 x	500 ml sealer (DOPE)
1 x	Nitroverdu 500 ml
1 x
1 x	Spray Graphit 33
1 x	Solvent Plasti Dip 1000 ml
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Painting GHT Lexan Black 150 ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Universal Colour Paste deep black 50 g
1 x	Paint gun for sprays
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Universal Colour Paste deep black 250 g
1 x	20 g tin paste
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Spannlack 1000 ml
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	18 mm reinforced hinge
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	15 mm reinforced hinge
1 x	PIX Hawk with accesories
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Long pinned hinge (12 uds)
1 x
1 x	3,0x60 mm allen screwdriver
1 x	Mobile Terminal
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Tape GFK 38 mm
2 x	SE Ring 350 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spikes Band (5 m)
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Oracover Azul 2 m
1 x	Oracover Black 2 m
1 x	Marker ties (20 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)

3,954.78EUR