Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Glass Bubbles » R2101301

6.90EUR

Glass Bubbles (0,12 g) 350 ml
[R2101301]

3M Glass Bubbles 0.12 g/cm³

•Yields lightweight filling compouds
•For epoxy, polyester, and vinyl ester resins

Technical data:
- Nominal density 0.12 g/cm³
- Colour: white
- Average particle size ca. 65 µm

Glass Bubbles are hollow micro glass balls and consist of a water-insoluble, chemically stable borosilicate glass of low-alkali content.
Light filling material used for mixing light filler, adhesive and moulding compound. The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The contents may become compressed during transport or storage.

few units

Reviews

Customers who bought this product also purchased

ABS tube 12.0x10.0x1000 mm few units	Festo 4mm Tubing Holder (10 uds) few units	Epoxy MID-CURE™ 15 min (130g) few units
Birch plywood plate 600x300x3.0 mm few units	Festo 6mm Tubing Holder (10 uds) few units	FESTO connector M7 barb fitting XL Tygon few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	"S" set for planes
1 x	PCARD Wireless System
1 x	Red smoke canister 100 g
1 x	Smoke set "S"
1 x	White smoke canister 140 g
1 x	AX-60 starters (5 pcs)
1 x	"S" set for boats
1 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	Blue smoke canister 140 g
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	"M" set
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Yellow smoke canister 65 g
1 x	Green smoke canister 140 g
1 x	Remote electric ignition system
1 x	AX-60 starters (5 pcs)
1 x	Parachute expulsion foam
1 x	Ventral support for AX-18/AX-60
1 x	B4-0 rocket charges (6 pcs)
1 x	Blue smoke canister 100 g
1 x	Initior Transmitter FTX2 Wireless
1 x	Green smoke canister 65 g
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Horn with ball 40x30
1 x	RH long aluminium horn (2pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn 5/20 with M2 Bearing
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Small aluminium horn red (2pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	20 mm carbon horn
1 x	Horn for flap control (1 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Cable with accesories
1 x	Cable control set
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	Pilot "Goose" (Slimline)
1 x	1/6 Pilot "Tony"
1 x	1/6 Pilot "Buddy"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	1/6 Pilot "John"
1 x	1/6 Pilot "Cindy"
1 x	1/4 Pilot "Mike"
1 x	Pilot "Anthony" (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	Piloto Jet "Red" 1/6 Scale
2 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Pilot JAN 1/4 Saiplanes
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	1/12 Pilot "Fighter"
1 x
1 x	Strip 2,5x1,25x330 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x	Red smoke canister 140 g
2 x	Red smoke canister 65 g
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	3l Smoke oil
2 x	White smoke canister 100 g
1 x	120x60 mm SLH KOVO wheel
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	Prop Shaft Adapter 5 mm "long"
1 x	1/7 Pilot "Japanese"
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Colormatic 2K Soft fine putty white, 1 kg
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Blades 330mm
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	Fiberglass plate 350x150x0.3 mm
1 x	White smoke canister 65 g
1 x	Glass fabric 25 g (2 m²)
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm)
1 x	Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x	60x25 mm tail wheel "type F3A"
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Wheel 18 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Micro control horn (2 pcs)
1 x	Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	Wheel FEMA 140 mm / 6 mm
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	Wheel collar 3 mm Ø (4 uds)

7,210.28EUR