398.90EUR

Gracia (Top Model)
[TM02087]


The wing spars and leading edge from carbon fibre gives the wing enough strength and stiffness.
Many expert pilots will be particularly surprised by its excellent flight qualities, given by the thin wing airfoil and weak weight. Thanks to the long fuselage, the model has a calm and steady glide path.There are several possibilities how to mix the functions of the flaps (high performance thermal soaring, spot landing etc.).

With the recommended gear train set, the performances are fantastics as well as when climbing (power) as soaring (lightness) and the flying time is counted in hours rather than in minutes!

The fuselage is carbon reinforced!!!
The model is designed and manufactured in Czech Republic.

Kit contents:
- Light fuselage (carbon reinforced) moulded in white tinted epoxy fiberglass
- Three-piece wing is made in balsa framework with wing joiner, leading edges and wing spar made of carbon and covered with Oracover®
- Tailplane are made in a balsa framework with carbon spar and leading edges and covered with Oracover®
- Top quality accessories
- Vinyl cnc cut stickers
- Complete assembly manual with step by step illustrations


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Propeller Pleg CAM Carbon 12.5x7.5
Propeller Pleg CAM Carbon 12.5x7.5

temporarily out of stock
temporarily out of stock

Spinner propeller pleg. 40 mm / 5,0 mm
Spinner propeller pleg. 40 mm / 5,0 mm

temporarily out of stock
temporarily out of stock

Albatros red/white (Top Model)
Albatros red/white (Top Model)

temporarily out of stock
temporarily out of stock

MPX Sub-D Adaptor
MPX Sub-D Adaptor

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Fully Threaded Steel Rod M3
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x 25 mm Sandpaper file
1 x 55 mm aluminium spinner (Kavan)
1 x Engine mounts for .09 - .19 engine
1 x 45 mm aluminium spinner (Kavan)
1 x Blade holder metal LAMA
1 x Cable coupler M2 (10 uds)
1 x Flybar support metal LAMA
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 50 mm aluminium spinner (Kavan)
1 x 60 mm aluminium spinner (Kavan)
1 x Superlight wheel 125 mm with valve (2 pcs)
1 x Swashplate metal LAMA
1 x Superlight deluxe wheel 50 mm (2 pcs)
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Superlight deluxe wheel 62 mm (2 pcs)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
2 x Servo GO-1053 MG 20.0kg
1 x Servo GO-1013 MG 3.8kg
1 x Propeller POWER-PROP 13x9 Izda
1 x DUPLEX 2.4EX Central Box 210
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x LASER 73" 1.85m (05) PILOT
1 x Cable coupler M3 (10 uds)
1 x Dummy motor GPW Wasp Scale 1/4
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x CC 03
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x 800TVL CMOS camera for FPV
1 x 3 LiPo XH>EH adapter
1 x Angle support XT60 conector
1 x Extension 30 cm (Futaba)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Recessed MPX connector support (6 pcs)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x CC 01
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x DPS Switch JR/JR
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Support pumb/filter Xicoy X45
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Extension silicon 100 cm (Graupner)
1 x 5 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Glases Innovation Plus
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x Surface Indicator Gauge Small
1 x BEC 3A FOXY
1 x Extension silicon 50 cm (Graupner)
1 x Buy Perforated film 100 cm / 50 m
1 x Extension silicon 25 cm (Graupner)
1 x Angle measurer
1 x Support FUEL DOT V3
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Field folding model stand SebArt
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Extension 15 cm (Futaba)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Tube Pitot to PIXHAWK
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Futaba Female 40 cm extension
1 x CC 02
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Buy Perforated film 145 cm / 50 m
1 x SIG Coverall 1.2x4.5 m
1 x SE Ring 450 mm (2 pcs)
1 x LIBELLE Standard 3.8m D-box H-201
1 x Program Card KAVAN ES
1 x Fox 4000 mm Airworld,cabina
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x ASK 21 6.8m
1 x 20x200 mm battery rings
1 x Ring 320 mm length (5 pcs)
1 x Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x Pin hinge 26x11 mm (10 uds)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Propeller balancer
1 x GRE-18 RTR Crawler 1:18 Blue
1 x Motor KAVAN PRO 2225-1600
1 x Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x Sandpaper file 13 mm
1 x Propeller KAVAN 32x12 2-Bl
1 x Concave-Convex sandpaper file 13 mm
1 x Crawler GRE-24 RTR 1:24 Arena
1 x SlowFlyer control horn (3 pcs)
1 x Rubber Insert hard, 1 Pcs.
1 x Metal clevis M3 (10 uds)
1 x TMM 1210-3S heli
1 x KAVAN Threadlocker - Blue 10ml
1 x Tape GFK 25 mm
1 x Kobuz 5000 mm (Airwold)
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Fox MDM 1 4000 mm Std.
1 x Recess mount-rem. glow plug set
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x SE Ring 240 mm (2 pcs)
1 x SIG Coverall 1.2x1.8 m
1 x Helice FOXY 22x10 2-Bl
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x Optical RPM Sensor
1 x Gracia Maxi ARF, spare wings (Top Model)
1 x Tape GFK 38 mm
1 x DG-303 ACRO 3750 mm (Airworld)
15,332.42EUR
Manufacturers
Manufacturer Info
Top Model
Top Model Homepage
Other products
Languages
Español English
Currencies