1 x | Cylinder for DA-85/170 (1 piece) |
1 x | Collector screw DA |
1 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
1 x | Gasket for motor DA 50-R |
2 x | Straightened threaded inox rod M3 |
4 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Front axi for DA50-R/DA100/DA150 |
1 x | Ball bearingfront for DA-50/60/VM120B2 Ball bearing for DA-170 |
1 x | DA-50R Prop Hub |
4 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Kevlar tank ULTIMATUM 2.0 (3.0 l) |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
2 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Connectors DEANS (T) micro |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Conector JR Servo female (10 pcs) |
2 x | Cable tie mounts 4.3 (4 uds) |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Connector CAN 15 |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | ABS 500 x 300 x 0,5 mm (white) |
1 x | BD-5 Pro ARF |
1 x | ABS 500 x 300 x 1,5 mm (white) |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm |
1 x | Conector BEC female (10 pcs) |
1 x | Aluminium sheet 500x250x0,2mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x5.0 mm |
2 x | Cockpit aluminium closing |
2 x | Conector FUTABA Servo male (10 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Bag connector 2 mm |
1 x | Connectors banna oro 8,0 mm (M/F) |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm |
3 x | Carbon Non-Woven, 160 g/m² 120 cm 1 m |
3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x3.0 mm |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | ARAMID honeycomb 610x1120x5 mm |
3 x | Vacuum bag, 1200 mm x 20 m |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
4 x | Carbon Non-crimp BIAXIAL 12k 200 g/m² 127 cm x 10 m |
2 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
4 x | Large flex hinge (12 uds) |
1 x | Pendulun 27g to tank |
2 x | Clamp ammeter |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Robart Door Hinge (Pk2) |
1 x | Straightened threaded rod M2-1m |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | 15 mm reinforced hinge |
2 x | Gates hinge |
1 x | 25 mm reinforced hinge |
1 x | A/C quality beech plywood 1250x620x1.5 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Long pinned hinge (12 uds) |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Small flex hinge (12 uds) |
1 x | A/C quality beech plywood 1250x620x2.0 mm |
1 x | Glases Nimbus "Black" |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Small pinned hinge (6 uds) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Long pinned hinge (6 uds) |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Birch plywood plate 600x300x0.4 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
3 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
3 x | Glases Nimbus |
5 x | Glases Stratus |
3 x | BALSA triangular 15x15x1000 mm |
3 x | Straightened rod Ø 0.8 mm x 1000 mm |
5 x | Small pinned hinge (12 uds) |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Futaba BLS255/272/471SV - Gear Set |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
3 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | 18 mm reinforced hinge |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | 18m Fitting barb |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Trailing edge BALSA 37x8x2 mm |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Glases Ace |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
3 x | A/C quality beech plywood 600x300x2.5 mm |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
3 x | Straightened rod Ø 0.5 mm x 1000 mm |
3 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | BALSA triangular 10x10x1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
3 x | Brass rod Ø 0.5 mm x 1000 mm |
3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | A/C quality beech plywood 600x300x2.0 mm |
3 x | Flap hinge (6 pcs) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | A/C quality beech plywood 600x300x4.0 mm |
2 x | A/C quality beech plywood 498x247x2.0 mm |
4 x | Micro flex hinge (12 uds) |
3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
3 x | A/C quality beech plywood 600x300x1.2 mm |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | DLE Ignition 111/120/170 |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
3 x | BALSA trip 3.0x3.0x1000 mm |
2 x | A/C quality beech plywood 498x247x1.2 mm |
1 x | A/C quality beech plywood 600x600x2.0 mm |
2 x | Beech dowels 3.0 x 1000 mm |
3 x | Beech dowels 4.0 x 1000 mm |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
4 x | Glases Aspen |
2 x | Beech dowels 2.0 x 1000 mm |
3 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | A/C quality beech plywood 1250x620x3.0 mm |
3 x | Straightened rod Ø 4.0 mm x 1000 mm |
3 x | Mahogany wood slat 2.0x2.0x1000 mm |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
3 x | JOHAN FIDI 1:20 |
2 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | A/C quality beech plywood 600x300x3.0 mm |
3 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | 22m Fitting barb |
3 x | Glases Flitemaster |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
3 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Circlip Bulon for MVVS 26/40 cc (2pcs) |
1 x | Carburator washer for MVVS 26/80 cc |
1 x | Pick up with cable MVVS 26cc |
1 x | MVVS 26/30 cc Crankshaft keyway |
1 x | Head Gasket 30cc (3 pcs) |
1 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | VIPER Jet 1700 mm Deco: Ferrari (JET-TENG) |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Gearwheel 9724/09 for ZG 45 |
2 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Reed valve petal for DLE 170M |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Nitroverdu 500 ml |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 2,5x60 mm allen screwdriver |
1 x | 1000 x 2 mm steel wires |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Carbon fiber rod 8 mmx1000 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Insulator ZG 20 |
1 x | Indoor hinge with servo arm integraded |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Motor Saito FG-14, 13,47 cc |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Blade holder metal LAMA |
1 x | Copier 2x20 cm pcs |
1 x | DLE 55 Muffler |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | |
1 x | Piston ring for DLE-20 |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | GPS/Vario module Graupner HoTT |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
2 x | SE Ring 250 mm (2 pcs) |
1 x | Rocket D3-P |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Balsa panel 6.0x100x1000 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | DPS Switch JR/JR |
1 x | Oracover Azul 1 m |
1 x | Carburator joint-holder for MVVS 26/30 cc |
2 x | Switch magnet for gas cap and magnet switch actuators |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm |
2 x | Filter Capacitor JR |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Motor D.A. 200 Magnesium |
1 x | Exhaust Adapter for MVVS 26-30 cc |
1 x | Cap Hispano Aviación |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Head Gasket 40cc (3 pcs) |
1 x | BULLIT Wing 1095 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | 18 mm wing servo holder |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
2 x | 55% silver electrodes (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 120 cm 5m |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | TMM 1210-3S heli |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Reed valve carrier, without reed valves DA-150L/170 |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Piston ring for DLE-30 |
1 x | SE Ring 200 mm (2 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Clip fixing for wing (2 pcs) |
2 x | Steel conrod DA-50R and DA-60 |
4 x | Glases Moritz |
2 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Motor DLE 200cc Std |
2 x | DPSI LR-S (with push buttons) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Zeiss Cinemizer OLED Full HD 3D |
1 x | Canopy Astra |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Motor Saito FG-36, 36 cc |
1 x | Motor support DLE 55/55RA |
1 x | Intake tube ZG 74/80, DA85, VM 170-420 with special screws |
2 x | 20 g tin paste |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Bidule 111 3000 mm Canopy |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | DPS Switch Ampere |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Gasoline Motor NGH GT-9 |
1 x | Motor DA 120 |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
2 x | ZENOAH G270RC |
1 x | Ball Link Plier |
3 x | Carbon fiber rod 1.2 mmx1000 mm |
1 x | 1/10 Pilot "Jack" |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 50 m |
1 x | Cylynder DLE 20-RA |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | Metalic nose for PROJETI |
1 x | Birch plywood board 600x300x3.0 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | ABS tube 4.0x2.0x1000 mm |
3 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
3 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | CC 03 |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Reed valve Assy - MVVS 45/50(L)58 cc |
1 x | Flybar support metal LAMA |
1 x | Ignition for ZG motors |
1 x | Ignition MVVS / VLACH - ICU Boxer |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | 1/12 Pilot "Langley" |
1 x | Oracover Black 2 m |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Piston pin for DA50R/DA100 |
1 x | Straightened threaded rod M3 |
1 x | Allen wheel collar M3x3 |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | DPSI RV Mini 6 Magic |
1 x | Shaft sleeve LAMA |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.2 mm) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | DPSI Micro - RCS RV |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | 1,5x50 mm allen screwdriver |
1 x | Ignition module ZG 38/S/SC |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Round flex hinge (12 uds) |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon Non-crimp BIAXIAL 12k 200 g/m² 127 cm x 5 m |
1 x | Pitts Muffler for D.A. 120 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | DPSI RV Mini 5 (2008) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | ANJA SL 35 |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Digi Tachometer |
1 x | Adapter 3,2 mm M8 |
1 x | 1/12 Pilot "Tom" |
1 x | Immersion TX 600 mW V3 5.8 GHz 100% compatible fatshark |
1 x | Reed valve for DA-60/70 |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Emcotec SPS Magnetic Switch Actuator |
1 x | SE Ring 400 mm (2 pcs) |
1 x | DLE 30 complete electronic ignition |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Glases Innovation Plus |
1 x | |
2 x | Motor MVVS 116 NP |
1 x | TMM 2512-3S heli |
1 x | Cinta Goldfix 1m |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Crimping tool |
2 x | 140 mm rods set for direction control |
1 x | Extension Ø25mm x L: 60 mm |
1 x | Shirt Hispano Aviación |
1 x | Baupl. LA CAPITANA |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Power supply NT 25 Amp. |
2 x | Stainless Steel Muffler D.A. 35-70 |
2 x | Reed valve for DA 50-R |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Ball Link Plier |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Birch plywood board 600x300x2.0 mm |
2 x | Carbon fiber rod 1.5 mmx1000 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Astra (Top Model) |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Cylinder for ZG20 |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | Carbon fiber rod 0.6 mmx1000 mm |
1 x | External switch nut spanner |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Cotter MVVS 45/50/58 cc |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Clevis plastico I=23 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Kwik link AL M2 L:23 mm (6 pcs) + Pin Ø 1,6 mm |
1 x | Hub DLE 30 |
1 x | Carburetor DLE 170M |
1 x | Rx 5.8 GHz 32 Duo Diversity |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
2 x | Rx Duo Diversity 5800 v3 AV |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | DA 70 Twin Gas Engine |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Balsa panel 2.5x100x1000 mm |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Kwik link AL M3 con Clip (2 pcs) |
3 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Clip mini fixing for wing (10 pcs) |
1 x | Dremel PERMAGRIT thin lime |
3 x | Piston pin for DA-60 DA-120 |
1 x | Muffler DLE 20 |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Motor DA 60 |
1 x | L ELBOW 90º ø 25 mm |
1 x | CMOS camera for FPV |
2 x | ACTIVE ARF Electric 1.995 mm |
1 x | ALU servo arm 3 mm shaft |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Adapter 3,0 mm M8 |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | CESSNA 182 1400 mm RTF |
1 x | Spikes Band (5 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Silentblock DLE 170M |
1 x | Joint for DA-60 reed valve |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
2 x | Carbon fiber rod 3.0 mmx1000 mm |
1 x | Steel cylinder screw DA50/60/100/120 |
1 x | Pan Head Screw M2x6 PH |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Vest clothes Hispano Aviación |
1 x | Prop hub for DA 150/200, old version |
1 x | Battery LiPo GENS 2200 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Screw M2x6 (10 pcs) |
1 x | |
1 x | Piper Cub 120 2450 mm (Pichler) |
1 x | 1/12 Pilot "Fighter" |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Trainer PIONEER ARF (RCM-Pelikan) |
1 x | 11 mm wing servo holder |
1 x | Universal Colour Paste white 50 g |
1 x | ROBIN S50E RED/WHITE |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | X-RAY Micro QR |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Exhaust gasket DA50R DA100 DA200 |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
2 x | Spray EC Red 400ml |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | 1/4 Pilot "Mike" |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Aluminium-screw, M5x20mm Red |
2 x | DPSI Micro MPS |
1 x | ESC ALPHA 60A HV |
1 x | 100g Flux Paste for Silver Solder |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Hobbylite Filler, Balsa colour |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Motor Moki S 400 cc 5 cylinders |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Carbon fiber rod 0.7 mmx1000 mm |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Adapter 3,2 mm M6 |
1 x | Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26 |
2 x | 3-blades 24x12 carbon prop Super Silence |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | MVVS exhaust gasket 26cc Red |
1 x | Saito FG-36 motor support |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | DPSI Ampere & Voltage bundle |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Motor DA 100L |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
1 x | Tape GFK 50 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Transmitter neckstrape HoTT (Graupner) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Piston ring for motor 40/45 cc |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Spring Clip 25 mm teflon tube |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | 12 mm dogdrive props |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Crankcase gasket DA-100 |
1 x | Combustible Glow DURAGLO 5% 5 Litros |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.2 mm) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
3 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | SUN 4002 PLUS |
1 x | Allen wheel collar M3x5 |
2 x | Motor MVVS 58 IRS "Liquid cooled" |
1 x | Joint for DA-50 reed valv |
1 x | Pan head screw M2x16 PH |
1 x | 2,3 mm Prop Drive Günther M4 |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Marker ties (20 pcs) |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Drive washer MVVS 58 cc Vlach 120º |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Reservoir capacitor for Spektrum receive |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Antenna holder bracket double |
1 x | A/C quality beech plywood 600x300x3.0 mm |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Strip 2,5x1,25x330 mm |
1 x | ZENOAH ZG 80B |
2 x | DPSI RV Mini 5 Magic |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Motormount DA-100, DA-100L and DA-120 |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Moki Exhaust Bend 200 mm |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Power supply 12 Amp.(Graupner) |
1 x | L ELBOW DA-120 long (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Me-163 |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | COMFORT MOUNT ø 55 mm |
1 x | MVVS exhaust gasket 26cc |
1 x | Mudguard wheels 112/127 mm |
1 x | Screw for mounting plate of DA100/120 |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | Medium pin type hinge (12 uds) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Carbon plate 350x150x4.0 mm |
1 x | 102 mm aluminium spinner |
1 x | Digital precision scale up to 2000 g |
1 x | Propeller plate for DA-120 / DA-170 / DA-150 New Version |
1 x | Recess mount-rem. glow plug set |
1 x | DPSI 2001 RV |
1 x | Universal Colour Paste deep black 250 g |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Screw M3x20 (10 pcs) |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Hot Glue Stick BLACK |
1 x | Fiberglass Panda™ 5000x1270 mm 25 g/m² |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Piston ring for DLE-20 RA |
1 x | METEOR 1.000 mm kit |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | ZENOAH ZG 26SLH Helicopter Engine |
1 x | Selfstarr EME35 |
1 x | Long reed valve petal for DA 100-R carburator |
1 x | Cylinder ZG 26SC/SLH |
1 x | Balsa plane |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Ignition MVVS 26 cc (read head) |
1 x | Stainless Steel Mini Pipe for Titan ZG 20 and ZG 23 |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Tx 5.8 GHz 8 ch 400 mW |
1 x | Plastic wheels 36 mm (2 pcs) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Bidule 55 V3 2460 mm |
1 x | Gasket, from reed valve carrier to carb carrier DA-150L/170 |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | Ignition for DA-50-R, DA-60, DA-85 |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | SKYWALKER FPV 1720 mm |
1 x | Motor MVVS 80 cc IRS ICU-L |
1 x | DPSI RV Mini 6 (2008) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Servo-V-Limiter 5.2V |
1 x | DPSI V-Match |
1 x | FPV Monitor 9 Zoll HD 5,8 GHz Diversity |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Optotronix X-Carrier |
1 x | Carbon fiber rod 1.0 mmx1000 mm |
1 x | OPTOTRONIX Aurora LCU |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Motor MVVS 30 cc IFS ICU-L |
1 x | |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | DPSI Micro - RCS |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Carbon fiber flat 1000x1.0x6.0 mm |
1 x | Eachine EV800 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Carbon fiber rod 1.5 mmx1000 mm |
1 x | SPS SafetyPowerSwitch 34V 60/120A |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
 |
56,627.15EUR |