Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units	MPS Gas-Cap-Powerswitch few units	Propeller MENZ-S 17x10 few units
Propeller MENZ-S 18x12 few units	Tacometer mini ignition RCEXL few units	Cyano SUPER - GOLD™ (12g) few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Aluminium tube with fibreglass case ø35x1.5mm, 1m
50.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	SE Ring 330 mm (4 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x
1 x	Tape GFK 38 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	20x200 mm battery rings
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Foil for sticking flaps and ailerons
2 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 360 mm (2 pcs)
2 x	Spikes Band (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CM-3
1 x	4 LiPo XH>EH adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Screw-lock connector M2 (2 uds)
1 x	JETImodel SINGLE BEC
1 x	Cockpit plastic closing
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	5 LiPo XH>EH adapter
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Steering arm 16 mm Ø 4 mm
1 x	CC 01
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Dean "T" - Futaba Adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (female)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	3 LiPo XH>EH adapter
1 x	2 LiPo XH>EH adapter
1 x	TrainerCord (master-learner)
1 x	CC 05
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	BEC 3A FOXY
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	MPX-Dean "T" Adapter
1 x	Locking cable tie 4.6x203 (uds)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Towing hook
1 x	Towing hook
1 x	Towing hook <3m
1 x	Fixed launching hook
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Bungee HLG Premium
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Universal Colour Paste deep black 250 g
1 x	1000 ml sealer (DOPE)
1 x	Partall paste 650 g
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Plasti Dip Liquid Tape 429 ml black
1 x
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller POWER-PROP 13x9
1 x	DUPLEX 2.4EX Central Box 210
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Propeller POWER-PROP 14x9
1 x	Z Bender - S Type Tool
1 x	Gold antispark 5,5 mm plug
1 x	Connectors DEANS (T)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Ventus 1:4 set of instruments
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	30 cm BEC cable (male)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Pushrod octagone 4/3 with coupler M3

2,670.06EUR