Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

MPS Gas-Cap-Powerswitch few units	Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units
Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units	Cyano SUPER - GOLD™ (12g) few units	Propeller MENZ-S 18x8 few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Fundas para el transporte F3A alas
70.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Kwik link with arm M5xM2,5xL30
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Angled clevis with threaded rod M3
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Cable coupler M2 (10 uds)
2 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Black large kwik link (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Metal ball clevis M3 (10 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
2 x	Cable coupler M2x66 (2 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Kwik link with arm M3xM2xL24
1 x	30 cm BEC cable (male)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	TrainerCord (master-learner)
1 x	CC 03
1 x	MPX-Dean "T" Adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	BEC 3A FOXY
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Dean "T" - Futaba Adapter
1 x	Adapter lead MPX/XT60
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	2 LiPo XH>EH adapter
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	3 LiPo XH>EH adapter
1 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	4 LiPo XH>EH adapter
1 x	Oracover Red 2 m
1 x	Oratex Antik 2m
1 x	Oracover Yellow CUB 10 m
1 x	Oracover Yellow CADMIO 2 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover ROYAL RED 2m
1 x	Ply-Span 450x600/13g Black
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover Azul 2 m
1 x	Oracover Orange 2 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover White 2 m
1 x	Oratex Natural White 2m
1 x	Oracover CHROME 2m
1 x	Oracover White 10 m
1 x	PROFICOVER 5m
1 x	Oracover CARBON Metalic 1 m
1 x	Oratex Red Fokker 10 m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oratex Silver 2m
1 x	Oracover Yellow CUB 2 m
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	1/10 Pilot "Jimmy"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/4 Pilot "Heidi"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	1/7 Pilot "Japanese"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/10 Pilot "Jack"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "Buddy"
1 x	Piloto jet 130 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	1/6 Pilot "Garry"
1 x	1/12 Pilot "Cougar"
1 x	Pilot "Goose" (Slimline)
1 x	Propeller balancer
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand
1 x	Propeller balancer
1 x	Field folding model stand SebArt
1 x	Surface Indicator Gauge Small
1 x	Angle measurer
1 x	Bungee HLG Premium
1 x	Servo NARO Max Std
1 x	Turnbuckle M1,6x20/30 (2pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Receptor CORE PBR-26XS 26ch
1 x	Xplorer4 anemometro
1 x	Opto Gas Engine Kill Switch
1 x	Skies 2x 335 mm + 1x Esqui 250mm

2,593.76EUR