Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units
MPS Gas-Cap-Powerswitch few units	Cyano SUPER - GOLD™ (12g) few units	Propeller MENZ-S 18x8 few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Aluminium tube with fibreglass case ø35x1.5mm, 500mm
30.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Stainless Steel Bend D 25x0,5mm
1 x	90° TUBE-ANGLE Ø 25 mm
1 x	Giant Scale Muffler D.A. 150 (2 pcs)
1 x	Sensor Ignition RCEXL Universal
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
1 x	Stainless Steel S-Bend D25x0,5mm
1 x	180° TUBE-ANGLE Ø 25 mm
1 x	Canister combo DLE 55 cc
1 x	Stainless Steel Bend D 12x0,4mm
1 x	Canister combo DLE 120 cc
1 x	Stainless Steel Muffler D.A. 50/100/120
1 x	90° TUBE-ANGLE Ø 28 mm
1 x	110 degree stainless steel bend D=18mm, widened to 20mm
1 x	Pick up DA50/100/150
1 x	Piston pin for DA-60 DA-120
1 x	BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x	L ELBOW DA-120 normal(2 pcs)
1 x	Hifht speed needle DA-50R/100I
1 x	Piston ring for DA-50R and DA-100
1 x	Reed valve Retainer, black rubber for DA-85, DA-100L and DA-120
1 x	Carb Carrier, red DA-85, DA-100L and DA-120
1 x	Ignition for DA-50-R, DA-60, DA-85
1 x	Steel conrod DA-50R and DA-60
1 x	Reed valve carrier, without reed valves DA-150L/170
1 x	Low speed needle DA-50R/100I
1 x	Piston ring for DA-60 and DA-120
1 x	‎Reed valve for DA-60/70
1 x	Oils Pumps Empty (1 liter)
1 x	Carburetor for DA150L/170
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	DLE Ignition 170M
1 x	DLE 85 Ignition unit
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Ferrita con funda
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Cable coupler M3 (10 uds)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	15 mm floating pad (30 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	3,2 mm Prop Adapter M6
1 x	4 mm Prop Adapter CN-Spinner
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Tirpiz Battleship 1:200
1 x	3,2 mm Prop Adapter M8
1 x	Towing hook <3m
1 x	SCHARNHORST accessories
1 x	3 mm Prop Adapter M6
1 x	Horn for flap control (1 pcs)
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	2 LiPo XH>EH adapter
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	CM-3
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	Ball link M3 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Long ball link M3 (6 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	4 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cabel charger transmitter GRAUPNER
1 x	M2,5 5Diam black ball link V2 (2 pcs)

2,952.37EUR