Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units
MPS Gas-Cap-Powerswitch few units	Propeller MENZ-S 18x8 few units	Straightened rod Ø 1.0 mm x 1000 mm few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Aluminium tube with fibreglass case ø35x1.5mm, 500mm
30.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Bungee HLG Premium
1 x	USB HLS prog. interface
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Dean "T" - Futaba Adapter
1 x	5 LiPo XH>EH adapter
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	MPX-Dean "T" Adapter
1 x	Steering arm 16 mm Ø 3 mm
2 x	30 cm BEC cable (female)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 12 mm Ø 4 mm
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Adapter lead MPX/EC3
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	2 LiPo XH>EH adapter
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	PPM Encoder Module
1 x	TrainerCord (master-learner)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	3 LiPo XH>EH adapter
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	One touch canopy lock
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	4 LiPo XH>EH adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	BEC 3A FOXY
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	30 cm BEC cable (male)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	CC 01
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Adapter lead MPX/XT60
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Glases Moritz
1 x	Glases Nimbus
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Nimbus "Black"
1 x	Glases Innovation Plus
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Extinguisher CO2 - 2 Kg
1 x	Towing hook <3m
1 x	Parachute expulsion foam
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Medidor ángulos y/o incidencias
1 x	1/10 Pilot "Jimmy"
1 x	1,5x50 mm allen screwdriver
1 x	CC 03
1 x	Catalog AERO-NAUT 2016
1 x	UBEC 6A KAVAN
1 x	Selfstart electronic switch
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	SBEC Jeti
1 x	Reguladro ACTROCON 60A
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Glow Plug Clip 1.3 Ah
1 x	Short Switch On/Off micro
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	Canopy Latch
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Control for forward wheel (MINI)
1 x	Stainless steel cable Ø 0.62 mm (10 m)

1,328.91EUR