Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units
MPS Gas-Cap-Powerswitch few units	Cyano SUPER - GOLD™ (12g) few units	Propeller MENZ-S 18x8 few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Pilatus PC-21 50E RED/WHITE (SebArt)
699.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	33,0 mm propeller (rigth propeller)
1 x	12x6 tree blades propeller
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	14 mm Portholes for screws (10 pcs)
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	14 mm portholes (10 pcs)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	29,0 mm propeller (rigth propeller)
1 x	25 mm fenders (10 pcs)
1 x	36 mm white plastic spinner for fixed propeller
1 x	16x10 tree blades propeller Master Airscrew
1 x	28 mm turnbuckle
1 x	2,3 mm Prop Adapter M6
2 x	3 mm Prop Adapter M6
1 x	38 mm fenders (10 pcs)
1 x	31,0 mm propeller (rigth propeller)
1 x	10 mm portholes (10 pcs)
1 x	1000 ml sealer (DOPE)
1 x	12x8 tree blades propeller
1 x	2 mm Prop Adapter M6
1 x	36 mm red plastic spinner for fixed propeller
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	15x7 tree blades propeller
1 x	36,0 mm propeller (rigth propeller)
1 x	10 mm Prop Adapter M12
1 x	Aramid 50 daN 50 m
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Para-RC Mix
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Spare spinner 36 mm 3-Bl
1 x	Spinner plastic red propeller pleg. 30 mm / 3,2
1 x	42 mm white plastic spinner for fixed propeller
1 x	Spinner 3BL propeller pleg. 40 mm / 5,0 mm
1 x	Spinner 3BL propeller pleg. 36 mm / 4,0 mm
1 x	Spinner 3BL propeller pleg. 40 mm / 4,0 mm
1 x	Spinner 3BL propeller pleg. 65 mm / 4,0 mm
1 x	50 mm white plastic spinner for folding propeller
1 x	Spinner 3BL propeller pleg. 36 mm / 5,0 mm
1 x	42 mm black plastic spinner for fixed propeller
1 x	50 mm black plastic spinner for fixed propeller
1 x	Spare spinner 65 mm 3-Bl
1 x	Spinner 3BL propeller pleg. 40 mm / 6,0 mm
1 x	Spinner plastic red fixed propeller 30 mm
1 x	Spinner 3BL propeller pleg. 42 mm / 5,0 mm
1 x	Doppelpoller 17 mm (6 uds)
1 x	50 mm white plastic spinner for fixed propeller
1 x	42 mm white plastic spinner for folding propeller
1 x	Spinner 3BL propeller pleg. 36 mm / 6,0 mm
1 x	Spinner red 36-38 mm
1 x	45 mm black plastic spinner for fixed propeller
1 x	Spare spinner 40/42 mm 3-Bl
1 x	Spinner plastic balck propeller pleg. 30 mm / 3,2
1 x	40 mm white plastic spinner for folding propeller
1 x	Spinner 3BL propeller pleg. 65 mm / 6,0 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Motor A2212/13T
1 x	3 mm Leader (L 100 mm)
1 x	3.2 mm Prop Adapter M8
1 x	Aero-Master (Aero-naut)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	1/10 Pilot "Jack"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	3,2 mm Prop Adapter M8
1 x	Ball link M2 (10 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Parachute expulsion foam
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	3l Smoke oil
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Futaba Female 40 cm extension
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Electric rocket starters (6 pcs)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Joint with bearing M3 22x5,5
1 x	Green smoke canister 65 g
1 x	Extension 7.5 cm
1 x	Extension silicon 10 cm (Futaba)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Marker ties (20 pcs)
1 x	Yellow smoke canister 100 g
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Glases Nimbus "Black"
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Xplorer4 anemometro
1 x	Conector MR-60 (pareja)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Glases Stratus
1 x	Crimping tool
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	DPSI magnetic switch actuator (housing)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)

3,218.15EUR