15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]


This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)


few units
few units

Reviews

Customers who bought this product also purchased
MPS Gas-Cap-Powerswitch
MPS Gas-Cap-Powerswitch

few units
few units

Propeller MENZ-S 17x10
Propeller MENZ-S 17x10

few units
few units

Propeller MENZ-S 18x12
Propeller MENZ-S 18x12

few units
few units

Cylidric hinge 33 mm Ø 2 mm (5 pcs)
Cylidric hinge 33 mm Ø 2 mm (5 pcs)

few units
few units

Cyano SUPER - GOLD™ (12g)
Cyano SUPER - GOLD™ (12g)

few units
few units

Propeller MENZ-S 18x8
Propeller MENZ-S 18x8

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Parachute PV6 for F3J
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Windsock Ozone L - 700 mm
1 x Opale Rucksack
1 x Aramid 50 daN 50 m
1 x Wing OXY 0,5 pulgadas2
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Vacuum pump P1-N
1 x Medidor ángulos y/o incidencias
1 x Copier 5x20 cm pcs
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x MYLAR film A350 (1000x500 mm)
1 x 12.7 mm 2:1 black termoretract tube
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Angled clevis with threaded rod M3
1 x Carbon plate 350x150x3.0 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Presto SF Light Filler styrene-free (420 g)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Truck-trailer for gliders 720 x 285 mm
1 x Cinta Goldfix 1m
1 x Oracover Black 2 m
1 x Surface Indicator Gauge Small
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x Profile ABS Square 2 x 1000 mm
1 x Red smoke canister 100 g
1 x Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace)
1 x Green smoke canister 65 g
1 x Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x Profile ABS half cane 2.5x1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x White smoke bombs AX-3 (10 pcs)
1 x Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace)
1 x Aluminium wide washer M4 Black (4 pcs)
2 x Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace)
1 x White smoke canister 140 g
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
2 x Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x A/C quality beech plywood 498x247x1.2 mm
1 x BALSA trip 10x10x1000 mm
1 x Ventral support for AX-18/AX-60
1 x CC 02
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line
1 x Smoke set "Glider"
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Blind nut M3 (4 pcs)
1 x BALSA triangular 8x8x1000 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Adapter lead MPX/XT60
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x Remote electric ignition system
1 x Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace)
1 x Dean "T" - Futaba Adapter
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Blind nut M4 (10 pcs)
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace)
1 x Bungee HLG Premium
1 x "S" set for boats
1 x Rubber profile 8-2 mm 2M
1 x 12 mm floating pad (49 pcs)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x L-Connector 4.0 mm x 1000 mm
1 x Parachute expulsion foam
1 x ABS angle 2,0x2,0x1000 mm
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case)
1 x L-Connector 1.5 mm x 1000 mm
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Cross Connector 4.0 mm x 1000 mm
1 x Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace)
4,424.87EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies