Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST MS825 V8.0 35kg 8.4v
84.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Adapter lead MPX/XT60
1 x	CM-3
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (female)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	5 LiPo XH>EH adapter
1 x	MPX-Dean "T" Adapter
1 x	Dean "T" - Futaba Adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Adapter lead MPX/EC3
1 x	TrainerCord (master-learner)
1 x	BEC 3A FOXY
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	2 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Towing hook
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	USB HLS prog. interface
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Cabel charger transmitter GRAUPNER
1 x	Fixed launching hook
1 x	30 cm BEC cable (male)
1 x	Extension silicon 10 cm (Graupner)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	SE Ring 400 mm (2 pcs)
1 x	Extension 15 cm (Futaba)
1 x	Extension 7.5 cm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 30 cm male (Futaba)
1 x	Ring 320 mm length (5 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	SE Ring 300 mm (2 pcs)
1 x	Extension silicon 100 cm (Futaba)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Futaba Female 40 cm extension
1 x	Cinta Goldfix 1m
1 x	Tape GFK 38 mm
1 x	Cabel "Y" 15 cm
1 x	Extension 100 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Tape GFK 50 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x
1 x	Premium servo extension 75cm
1 x	Futaba Female 40 cm extension
1 x	20x1000 mm Ring Strap Back To Back
1 x	Extension silicon 100 cm (Graupner)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	PCARD Wireless System
1 x	Blue smoke canister 140 g
1 x	DPSI Ampere & Voltage bundle
1 x	Yellow smoke canister 100 g
1 x	White smoke canister 140 g
1 x	Remote electric ignition system
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	Initior Transmitter FTX2 Wireless
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	3l Smoke oil
1 x	DPSI RV Mini 5 (2008)
1 x	DPSI magnetic switch actuator (PCB)
1 x	Spannlack 1000 ml
1 x	Spray Graphit 33
1 x	Spray adhesive AEROFIX 2
1 x	Nitroverdu 500 ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Painting GHT Lexan Black 150 ml
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Release wax 250ml
1 x	Universal Colour Paste deep black 250 g
1 x	1000 ml sealer (DOPE)
1 x	20 g tin paste
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Solvent Plasti Dip 1000 ml
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	M3 black washers (4 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ORACOVER transparent Yellow (10 m)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)

2,003.35EUR