Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DC24 II Transmitter case insert
35.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Glases Nimbus "Black"
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Glases Nimbus
1 x	Glases Flitemaster
1 x	Glases Ace
1 x	Glases Moritz
1 x
2 x	20x200 mm battery rings
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cinta Goldfix 1m
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Xplorer1 anemometro
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 240 mm (2 pcs)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
2 x	SE Ring 450 mm (2 pcs)
1 x	Xplorer4 anemometro
2 x	SE Ring 300 mm (2 pcs)
1 x	Xplorer3 anemometro
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Interface Jack Adapter IKARUS
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CM-3
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	JETImodel SINGLE BEC
1 x	CC 01
1 x	Adapter lead MPX/EC3
1 x	5 LiPo XH>EH adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	3 LiPo XH>EH adapter
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	PPM Encoder Module
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller POWER-PROP 14x9
1 x	Propeller POWER-PROP 13x9
1 x	DUPLEX 2.4EX Central Box 210
1 x	Medidor ángulos y/o incidencias
1 x	Socket head ball link M3 (2 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	1/10 Pilot "Jack"
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Glases Stratus
1 x	Support pump Xicoy X45
1 x	Servo HITEC D131 MW nano
1 x	Servo MKS HV69
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Servo HITEC D941 TW
1 x	Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	ALU double servo arm 3 mm shaft
1 x	Futaba 38 mm servo arm with ball link
1 x	L-shaped servo mount
1 x	Servoarm SH-81, two sides, aluminium
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Piñones SAVOX SH-0350
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Horns set HS-65HB/MG, 5065MG
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
1 x	Servo DL3017 Digi 17Kg-0.15s/60º
1 x	Futaba 2x20 mm servo double arm
1 x	13 mm wing servo holder
1 x	Servo TOPMODEL DS1413 T
1 x	Gear for D 200 BX
1 x	Servo Robbe FS 128 BB MG HV Digital
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Tape GFK 25 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Slave-cable USB Easy Sim
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	F3A carbon 85 mm spinner for Hacker Q-80
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Tarjeta programadora RAY G2
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Cable Cargador FUTABA
1 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	F3A carbon 82 mm spinner for 12 mm axis
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Spinner INOVA 63 mm White
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Spinner 82mm Black ventilado
1 x	Spinner INOVA 102 mm Black
1 x	Marker ties (20 pcs)
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Electronic switch JETI SP06 Opto
1 x	Dean "T" - Futaba Adapter
1 x	Female connector for 12 pines AWG

3,836.93EUR