40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]


MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Opto Gas Engine Kill Switch
Opto Gas Engine Kill Switch

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 17x10
Propeller MENZ-S 17x10

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 18x12
Propeller MENZ-S 18x12

temporarily out of stock
temporarily out of stock

Cylidric hinge 33 mm Ø 2 mm (5 pcs)
Cylidric hinge 33 mm Ø 2 mm (5 pcs)

temporarily out of stock
temporarily out of stock

Cable coupler M3 (10 uds)
Cable coupler M3 (10 uds)

temporarily out of stock
temporarily out of stock

PWC6 PowerWingConnector for 6 servos with fuselage socket
PWC6 PowerWingConnector for 6 servos with fuselage socket

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS tube 9.0x8.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
2 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 4.0x3.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x Screw-lock connector M2 (2 uds)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x One touch canopy lock
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x 15 mm reinforced hinge
1 x Gates hinge
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Cockpit plastic closing
1 x 25 mm reinforced hinge
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Canopy Latch
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Large flex hinge (12 uds)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Long pinned hinge (12 uds)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Cabin latch Fox MDM1 4m (pair)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Micro flex hinge (12 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Threaded coupler M2 (10 uds)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Vacuum pump 12 CFM
1 x Monokote ROJO misil (1.8x0.65m)
1 x Pilot "Dick" Legends Series (Slimline)
1,506.48EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies