Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DC24 II Transmitter case insert
35.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	20x1000 mm Ring Strap Back To Back
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Marker ties (20 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 50 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Ring 320 mm length (5 pcs)
2 x	Cinta Goldfix 1m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Spikes Band (5 m)
2 x	SE Ring 350 mm (2 pcs)
2 x	20x200 mm battery rings
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 400 mm (2 pcs)
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	XH female balance (2S) connector (2 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector BEC female (10 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Connector CAN 15
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Connectors DEANS (T)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Optotronix Aurora Plug
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	30 cm DEANS female connector
1 x	Gold antispark 4 mm plug
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	2 mm female connector (2 pcs) with safety connector
2 x	XH male balance (2S) connector (2 pcs)
1 x	Conector BEC male (10 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Gold antispark 5,5 mm plug
1 x	Aramid 50 daN 50 m
1 x	MAX pilot ARTF
1 x	DYNAMOMETER S-1580
1 x	Ballast 700gr OPALE
1 x	Windsock Ozone L - 700 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Wing OXY 0,5 pulgadas2
1 x	Wing OXY 5,0 m2
1 x	Parachute BACKUP X100
1 x	Parachute PV6 for F3J
1 x	LUCAS pilot ARTF
1 x	SE Ring 360 mm (2 pcs)
1 x	Set cintas unión paracaídas 145 cm
1 x	Paramotor BackPack XXS (without accessories)
1 x	SE Ring 450 mm (2 pcs)
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Paramotor Trike XL
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Parachute P4
1 x	Paramotor BackPack XXS 2
1 x	SE Ring 480 mm (2 pcs)
1 x	Optical RPM Sensor
1 x	Trike XL motor set (motor+esc+prop)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	B4-0 rocket charges (6 pcs)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Ventus 1:4 set of instruments
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	ABS tube 16.0x14.0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Propeller POWER-PROP 7x7
1 x	Support Pitot JETI
1 x	Recessed MPX connector support (6 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	MPX Sub-D Adaptor
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Bearing 3x6x2,5
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Receiver replacement antenna, approx. 85
1 x	MR30 connector male
1 x	XH male balance (4S) connector (2 pcs)

5,708.73EUR