Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Pilatus PC-21 50E RED/WHITE (SebArt)
699.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	SE Ring 450 mm (2 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	SE Ring 200 mm (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	SE Ring 300 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 50 mm
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	Cockpit plastic closing
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Tape GFK 25 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	Tape GFK 38 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 360 mm (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 10 cm (Futaba)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Premium servo extension 100cm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension 30 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cabel "Y" 15 cm
1 x	Premium servo extension 25cm
1 x	Extension 7.5 cm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Flap hinge (6 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Long pinned hinge (12 uds)
1 x	25 mm reinforced hinge
1 x	Miniature brass strap hinge, 1 m
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Gates hinge
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Gates hinge aluminium (1 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m

1,103.83EUR