Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock
Propeller MENZ-S 18x12 temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
22.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Oracover Orange 2 m
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Ply-Span 450x600/13g Blue
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Angled clevis with threaded rod M3
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Foil for sticking flaps and ailerons
1 x	800TVL CMOS camera for FPV
1 x	Painting GHT Lexan Black 150 ml
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Oracover Black 2 m
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Oracover Brown 2 m
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Piloto jet 130 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	SE Ring 480 mm (2 pcs)
1 x	WingFix ULTRA Black Edition
1 x	1/6 Pilot "Tony"
1 x
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Hobbylite Filler, Balsa colour
1 x	SE Ring 240 mm (2 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Z Bender - S Type Tool
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Ball Link Plier
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Surface Indicator Gauge Small
1 x	Glases Nimbus "Black"
1 x	Screwdriver for Hexagon 1,5mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	1,5x50 mm allen screwdriver
1 x	15 mm reinforced hinge
1 x	1/12 Pilot "Cougar"
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	1000 ml sealer (DOPE)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Flap hinge (6 pcs)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	2,0x50 mm allen screwdriver
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	ORACOVER Fluor red (2 m)
1 x	Horn 6/27 with M3 Bearing
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Glases Aspen
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Gates hinge
1 x	Spray EC Red 400ml
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Universal Colour Paste deep black 250 g
1 x	Copier 2x20 cm pcs
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	1/6 Pilot "Cindy"
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	1/10 Pilot "Jimmy"
1 x	Hot Glue Stick RED
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	1/10 Pilot "Jack"
1 x	Glases Stratus
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Horn with ball 55x40
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Crimping tool
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Large flex hinge (12 uds)
1 x	SlowFlyer control horn (3 pcs)
1 x	Partall paste 650 g
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Oracover Yellow CUB 10 m
1 x	Rubber profile 6-2 mm 2M
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Spray Graphit 33
1 x	Canopy Latch
1 x	USB HLS prog. interface
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	"S" set for planes
1 x	Dean "T" - Futaba Adapter
1 x	Red smoke canister 65 g
1 x	BALSA trip 10x10x1000 mm
1 x	3l Smoke oil
1 x	Green smoke canister 140 g
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)

3,251.53EUR