Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 18x12 temporarily out of stock	Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Opto Gas Engine Kill Switch temporarily out of stock
Propeller MENZ-S 17x10 temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	Propeller APC 8x4 Electric temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Aluminium tube with fibreglass case ø35x1.5mm, 1m
50.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extension silicon 30 cm male (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Extension 30 cm (Futaba)
1 x	Propeller balancer
1 x	Extension lead 15 cm Multiplex
1 x	Surface Indicator Gauge Small
1 x	Medidor ángulos y/o incidencias
1 x	Premium servo extension 25cm
1 x	Premium servo extension 50cm
3 x	Extension silicon 100 cm (Graupner)
2 x	Truck-trailer for gliders 720 x 239 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 30 cm male (Futaba)
2 x	Extension PVC 150 cm (Graupner)
1 x	Propeller balancer
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension 90 cm (Futaba)
1 x	Premium servo extension 75cm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension silicon 100 cm (Futaba)
2 x	Cabel "Y" 30 cm (graupner)
2 x	Field folding model stand SebArt
1 x	Field folding model stand
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Extension silicon 30 cm female (Futaba)
1 x	Angle of incidence meter
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 35 cm male (Futaba)
1 x	Extension 100 cm (Futaba)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 10 cm (Graupner)
1 x	Angle measurer
1 x	Extension 15 cm (Futaba)
2 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Locking cable tie 4.6x203 (uds)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Canopy Latch
1 x	Ferrita 17x10x6.5 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Ferrita con funda
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Ferrita 14x8x5.5 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Smoke set "S"
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Long pinned hinge (6 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Cabel "Y" 15 cm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	11 mm Rubber pads (14 pcs)
1 x	Allen wheel collar M3x5
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Pushrod octagone 4/3
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod M3
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	100 mm rods set for direction control
1 x	Clip fixing for wing (2 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	100 mm rods + T patellas set for direction control
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	45 mm rods set for direction control

4,196.62EUR