Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Aluminium tube with fibreglass case ø35x1.5mm, 1m
50.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Cabling for Fox MDM1 wings
1 x	Circlick securite
1 x	Connector Sub-D 2+5 Female
2 x	CM-3
1 x	5 LiPo XH>EH adapter
1 x	CC 05
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	DPS Switch JR/JR
1 x	UBEC 6A KAVAN
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	2 LiPo XH>EH adapter
1 x	Dean "T" - Futaba Adapter
2 x	4 LiPo XH>EH adapter
1 x	BEC 3A FOXY
1 x	Double conector with JR adapter and 200 mm extension
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	CC 02
1 x	CC 03
1 x	Connector Sub-D 2+5 Male
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CC 01
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (female)
2 x	30 cm BEC cable (male)
1 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Oracover ROYAL RED 2m
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Oracover Brown 2 m
1 x	Oracover Azul Cielo 2 m
1 x	ABS tube 3.0x2.0x330 mm
1 x	Oracover White 10 m
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Ply-Span 450x600/13g Blue
1 x	Oratex Natural White 20m
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors DEANS (T)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	MPX Sub-D Adaptor
1 x	Conector Servo female 4 pines
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	XH female balance (4S) connector (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	XH female balance (5S) connector (2 pcs)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Gold antispark 4 mm plug
1 x	Optotronix Aurora Plug
1 x	XH female balance (2S) connector (2 pcs)
1 x	Slave-cable USB Easy Sim
1 x	TrainerCord (master-learner)
1 x	Male connector for 20 pines AWG
1 x	Field folding model stand SebArt
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Covered closure or fairings
1 x	Para-RC Mix
1 x	LUCAS pilot ARTF
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Threaded coupler M2 (10 pcs)

2,234.39EUR