Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extension 7.5 cm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 30 cm male (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Extension 30 cm (Futaba)
1 x	Extension 90 cm (Futaba)
1 x	Futaba male 40 cm extension
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 35 cm male (Futaba)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Premium servo extension 25cm
1 x	Extension PVC 150 cm (Graupner)
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 10 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Premium servo extension 100cm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 100 cm (Futaba)
1 x	200 mm extensión servo HITEC/JR
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 10 cm (Graupner)
1 x	MPX Sub-D Adaptor
1 x	XH male balance (4S) connector (2 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 4 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Gold antispark 4 mm plug
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors DEANS (T)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	XH male balance (3S) connector (2 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x
1 x	Z Bender - S Type Tool
1 x	Screwdriver for Torx® TX6
1 x	Hot Glue Stick GREEN
1 x	Digital precision scale up to 2000 g
1 x	Z Bender - S Type Tool
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Cut tube
1 x	Starter 12v (Max 180 and 30ccm)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Copier 2x20 cm pcs
1 x	Screwdriver for Hexagon 1,5mm
1 x	2,0x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Screwdriver for Torx® TX8
1 x	Vacuum pump 12 CFM
1 x	3,0x60 mm allen screwdriver
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Tape GFK 38 mm
1 x	Micro flex hinge (12 uds)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	30 cm MULTIPLEX female connector
1 x	Red 3m5 mm connector holder
1 x	MPX screwable clips (4 pcs)
1 x	XH LiPo extension lead
1 x	Bag connector 2 mm
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Conector BEC male (10 pcs)
1 x	Motor OS 3820-1200 electric
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Conector FUTABA Servo female (10 pcs)

2,294.04EUR