Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DC24 II Transmitter case insert
35.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	EC-Cutter
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Extra Hard Titanium Herxagon Screwdrivers
2 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Dremel PERMAGRIT thin lime
1 x
1 x	Ball Link Plier
1 x	Cut tube
1 x	Dust collector for mould cleaning
1 x	Concave-Convex sandpaper file 13 mm
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	2,0x50 mm allen screwdriver
1 x	55% silver electrodes (2 pcs)
1 x	1,5x50 mm allen screwdriver
1 x	Digital scale up to 40 kg
1 x	Copier 2x20 cm pcs
1 x	Crimping tool
1 x	3,0x60 mm allen screwdriver
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Copier 5x20 cm pcs
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Dremel 3000 130W
1 x	Digital precision scale up to 2000 g
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Flap hinge (6 pcs)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
2 x	15 mm reinforced hinge
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	25 mm reinforced hinge
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Vasa model Catapult
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Small pinned hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Bungee HLG Premium
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Horn for flap control (1 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	RH long aluminium horn (2pcs)
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Small aluminium horn red (2pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn with ball 55x40
1 x	30 cm BEC cable (male)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	4 LiPo XH>EH adapter
1 x	USB HLS prog. interface
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	CC 03
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	30 cm BEC cable (female)
1 x	BEC 3A FOXY
1 x	JETImodel SINGLE BEC
1 x	2 LiPo XH>EH adapter
1 x	Beech dowels 4.0 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	3 LiPo XH>EH adapter
1 x	BALSA triangular 10x10x1000 mm
1 x	CC 02
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	Dean "T" - Futaba Adapter
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	BALSA triangular 8x8x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Adapter lead MPX/XT60
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Adapter lead MPX/EC3
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	CM-3
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Pine wood slat 10x10x1000 mm
1 x	CC 01
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	BALSA trip 10x10x1000 mm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Canopy Latch
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Steering arm 12 mm Ø 4 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Cockpit plastic closing
1 x	Universal Filter
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Robart Door Hinge (Pk2)
1 x	Indoor hinge with servo arm integraded
1 x	Servo NARO Max Std
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	18 mm reinforced hinge
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Fishing boat Jule Fischkutter
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Premium servo extension 25cm
1 x	Small adjustable control horn with bearing
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Micro control horn T2 Ø 1
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Circlick securite
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Multi-adapter balancer JST/C - TP
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Connector CAN 15
1 x	SBEC Jeti
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	MAX BEC 2
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	DPSI magnetic switch actuator (housing)

3,316.59EUR