Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

AXI 2820/12 CYCLONE
142.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	EC-Cutter
1 x	Dean-T Plug Mold
1 x	Digital scale up to 40 kg
2 x	Copier 2x20 cm pcs
1 x	Digital weight, angle and balance meter BASIC
1 x	Copier 5x20 cm pcs
1 x
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	100g Flux Paste for Silver Solder
2 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	1,5x50 mm allen screwdriver
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	25 mm Sandpaper file
2 x	Dust collector for mould cleaning
2 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	2,5x60 mm allen screwdriver
2 x	2,0x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Ball Link Plier
2 x	Fresa corte diamante Ø 1.0mm (bola)
2 x	Cut tube
1 x	Concave-Convex sandpaper file 13 mm
1 x	Large flex hinge (12 uds)
1 x	Small pinned hinge (12 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Flap hinge (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	25 mm reinforced hinge
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Gates hinge aluminium (1 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
2 x	15 mm reinforced hinge
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Stickers-digit for marking
1 x	Hot Glue Stick BLACK
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	3,0x60 mm allen screwdriver
1 x	Z Bender - S Type Tool
1 x	Screwdriver for Torx® TX8
1 x	Starter EM Gear Power 80
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
2 x	Aramid fibre shears Proton®, 21 cm / 8" length
2 x	Hexagonal ball head 2.0 x 50 mm
1 x	Starter Sullivan-STAR 603 DINATRON
3 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Hot Glue Stick RED
2 x	CC 02
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Double conector with JR adapter and 200 mm extension
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	3 LiPo XH>EH adapter
1 x	CM-3
1 x	CC 03
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 01
1 x	Adapter lead MPX/EC3
1 x	Connector Sub-D 2+5 Female
2 x	Ventus 1:4 set of instruments
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	1/6 Pilot "Buddy"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
2 x	1/10 Pilot "Jack"
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/12 Pilot "Fighter"
1 x	1/6 Pilot "Cindy"
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Pilot "Goose" (Slimline)
2 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x	1/4 Pilot "Mike"
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "John"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Piloto Jet "Red" 1/6 Scale
1 x	1/4 Pilot "Heidi"
1 x	Motor A2212/13T
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Sub-D Plug Mold
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	55% silver electrodes (2 pcs)
1 x	3,2x1000 mm 2:1 red termoretract tube
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Dremel 3000 130W
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Angle support XT60 conector
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	110x55 mm SLH KOVO wheel
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	1/10 Pilot "Jimmy"
1 x	102 mm INO spinner (carbon imitation)
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x	Bandera Frankr 4x6
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Fishing boat Jule Fischkutter
1 x	Remolcador "Jonny Hafenschlepper"
1 x	Ancla 16 mm (2 pcs)
1 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	La Capitania di Venetia accesories
1 x	Glow starter with charger 230v
1 x	Glow Plug Clip 1.3 Ah
1 x	Propeller diller for DLE111 and DA85-150
1 x	Z Bender - S Type Tool
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
2 x	Sealing Iron Sleeve PROF
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	Vacuum pump P1-N
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Handle for PERMAGRIT lime
1 x	Heat Seal Iron
1 x	Mold plugs XT-30
1 x	Tool for entel
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Mini-handed clamp
1 x	Smart Soldering Iron 110W/230V AC
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Kavan Car 25% nitro 1l
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Propeller diller 5/6,3/8/9
1 x	Sealing Iron STANDARD
1 x	Pistola termica MH 550 micro
1 x	Mini Lock Grips 2PCS
1 x	Steel brush wheel with 2.35mm
1 x	2 LiPo XH>EH adapter
1 x	MAX BEC
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x	Connector CAN 15
1 x	1/12 Pilot "Tom"
1 x	4 LiPo XH>EH adapter
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	SBEC 40
1 x	Female connector for 16 pines AWG
1 x	Precision wrench L100 mm
1 x	1/7 Pilot "Japanese"

6,685.57EUR