Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock	Conector JR/Uni Servo female BLUE silicon (10 pcs) temporarily out of stock	Ball link M3 RPA's-UAV's temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

AXI 2820/12 CYCLONE
142.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Cockpit plastic closing
1 x	Locking cable tie 4.6x203 (uds)
1 x	One touch canopy lock
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
2 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	SUS wire 3m (nylon coated)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Canopy Latch
1 x	Locking cable tie 3.2x142 (uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Long pinned hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	15 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	CC 01
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Adapter lead MPX/XT60
1 x	Circlick securite
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 03
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	4 LiPo XH>EH adapter
1 x	MPX-Dean "T" Adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	2 LiPo XH>EH adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	CC 02
2 x	CC 05
1 x	Adapter lead MPX/EC3
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Angled clevis with threaded rod M3
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	SlowFlyer control horn (3 pcs)
1 x	Small aluminium horn red (2pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Cockpit aluminium closing
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Pulley brass 10/2 (2 pcs)
1 x	Kwik link with arm M3xM2xL24
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Female connector for 6 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	FX three-position switched channel, long
1 x	SPARK Switch 7.4v
1 x	Connector CAN 15
1 x	Female connector for 20 pines AWG
1 x	Filler Gauges
1 x	2,0x50 mm allen screwdriver
1 x	Selfstart electronic switch

1,312.15EUR