Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock	Conector JR/Uni Servo female BLUE silicon (10 pcs) temporarily out of stock	Ball link M3 RPA's-UAV's temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Ball Bearing Oil 25 ml
7.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Adapter lead MPX/XT60
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	2 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CM-3
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CC 05
1 x	CC 03
1 x	TrainerCord (master-learner)
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Adapter lead MPX/EC3
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	USB HLS prog. interface
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	JETImodel SINGLE BEC
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Dean "T" - Futaba Adapter
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Bungee HLG Premium
1 x	Jeti Black cap
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	BALSA triangular 6x6x1000 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	BALSA triangular 15x15x1000 mm
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Beech dowels 10 mm x 1000 mm
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Couple M4 for wire (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Angled clevis with threaded rod M3
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	BALSA leading edge 8x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Adjustable launching hook
1 x	Fixed launching hook
1 x	Towing hook
1 x	Tow hook for tug
1 x	Towing hook <3m
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Starter EM Gear Power 80
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Locking cable tie 3.2x142 (uds)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Female connector for 16 pines AWG
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 02
1 x	MPX-Dean "T" Adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	BEC 3A FOXY
1 x	5 LiPo XH>EH adapter
1 x	Double conector with JR adapter and 200 mm extension
1 x	Connector Sub-D 2+5 Female

5,039.71EUR