Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock	Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Small aluminium horn blue (2pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Brass control horn M3 short for wire (2 pcs)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn 5/20 with M2 Bearing
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x	6 mm red aluminium threaded horn with patella
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Cable with accesories
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Horn 6/20 with M3 Bearing
1 x	Cable control set
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	Horn 5/15 with M2 Bearing
1 x	Brass control horn M4 short for wire (10pcs)
2 x	6 mm aluminium horn with patella
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Small aluminium horn red (2pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Conector Servo female 4 pines
2 x	2 mm female connector (2 pcs) with safety connector
1 x	XH female balance (2S) connector (2 pcs)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	XH male balance (3S) connector (2 pcs)
1 x	Optotronix Aurora Plug
1 x	30 cm DEANS female connector
1 x	Connectors DEANS (T)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connector CAN 15
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Connectors DEANS 4 pins (1 pair)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Cockpit plastic closing
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 3 mm
1 x	Ferrita con funda
1 x	Ferrita 27x14x7 mm
1 x	Ferrita 14x8x5.5 mm
1 x	1/10 Pilot "Jimmy"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Oracover CARBON Metalic 1 m
1 x	Oratex White 2m
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	ABS I Strip 20x10x1000 mm
1 x	Nitroverdu 500 ml
1 x	Balsa panel 1.0x100x1000 mm
1 x	Surface Indicator Gauge Small
1 x	Neck strap Double V2
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
1 x	Switch Cap L (black)
1 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x	Battery FUTABA 18MZ
1 x	Switch Cap M (red)
1 x	Rudder forward 90x28 "type Kato"
2 x	Red 3m5 mm connector holder
1 x	Rudder forward 70x28 "type Kato"
1 x	XH male balance (6S) connector (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Micro control horn (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
2 x	MPX Support
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	6 mm M3 variable horn
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	6 mm M3 variable inclined horn
1 x	RH long aluminium horn (2pcs)
1 x	MR30 connector male
1 x	Micro control horn T2 Ø 1
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	Protector Connector Dean-T (1 pair)
1 x	Brass control horn M2 long for wire (10pcs)
2 x	Soporte carbono MR30 (2 pcs)
1 x	5 mm M2 variable horn
1 x	Connectors MPX male
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Extra long horn 60x30
1 x	Motor OS 3820-1200 electric
1 x	Mounting frame MPX female connector
1 x	Soldering PCBs 8pin, 5 pieces
1 x	XT-60 connector (male)
1 x	Mounting frame MPX male connector
1 x	Pilot JAN 1/4 Saiplanes
1 x	11 mm Rubber pads (14 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	1/6 Pilot "Tony"
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Cierva C30 Elevator
1 x	Head lower part
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	AddCAP 10AS capacitors
1 x	DUPLEX 2.4EX Central Box 220
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	Allen wheel collar M3x5
1 x	100 mm rods + T patellas set for direction control

3,777.35EUR