54.90EUR

GPS Logger Dymond
[DY0319173]


The DYMOND GPS Logger is a compact and versatile device to fly with model, logging GPS-related data that can be recorded and evaluated. Data are calculated such as speed, altitude and track length. The most important values can be read directly on the device, so you e.g. can find out directly how fast the model was at maximum or how high it flew. On the PC, then the motion data can be visualized as a path in a map.

- Compact and easy to carry
- Speed meter with top speed memory
- Max. altitude
- GPS Coordinator
- Built-in 4M flash (recording time: 6 hours)
- UTC timestamp logged for each track point
- Built-in rechargeable, LiPo bettery 200mAh (Operating time: 150 minutes)
- Support both Metric and Imperial system of measurement
- PC link for data logging & google map
- Firmware upgradable

Specs:
- 32 channels
- Size: 65,7 x 39,6 x 20,8 mm
- Weight: 41 g
- Update frequency: 1 Hz
- Sensitivity: -159 dBm
- Temperature range: 0 - 50° C


few units
few units

Reviews

Customers who bought this product also purchased
20x200 mm battery rings
20x200 mm battery rings

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Switch Cap M (black)
2 x Antenna Hole Cap V1 (Silver)
2 x Futaba Neckstrap
2 x Futaba Radio Case
2 x Antenna holder bracket double
2 x Futaba Aero Large Case - Internal Foam
1 x MULTIPLEX ALUMINUM CASE "M-LINK"
2 x Switch Cap L (Blue)
1 x Decorative caps, multicoloured
2 x Switch Cap M (silver)
2 x Switch Cap L (black)
2 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
2 x Charger FUTABA SQN30W12P-08 220v
2 x Contest-S-Pult-Carbon mc-20/mc-24
2 x FPV Station for SE TX-Tray V1
2 x Switch Cap M (blue)
2 x Battery FUTABA 18MZ
1 x Switch Cap L (Red)
2 x Switch Cap L (silver)
2 x Decorative caps, multicoloured, short
2 x Switch Cap M (red)
2 x Switch moment button, 2 functions, long FUTABA
1 x Oracover CHROME 2m
2 x LOWER TOW HOOK
1 x Adap/Exten for Futaba 12-14C
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Receiver bed (Blue)
1 x Maleta transporte FUTABA 10PX
1 x Transmitter Balancer SPK DX-8
1 x Futaba S-Bus Rx/Gyro Link Lead
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Oracover Brown 2 m
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Oracover Yellow CUB 10 m
1 x Three-function control switch by FUTABA
1 x Oratex White 2m
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Oracover Green10 m
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x MYLAR film A350 (1000x500 mm)
2 x Tow hook for tug
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Oracover White 2 m
3 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Oratex Natural White 2m
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Ply-Span 450x600/13g Blue
1 x Transmitter Balancer Futaba V
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Adjustable launching hook
2 x Carbon fiber rod 10 mm x 1000 mm
2 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x ORACOVER Fluor red (2 m)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Oracover Verde 2 m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x Monokote PLATINO metalizado (1.8x0.65m)
2 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Three-function control switch by FUTABA
1 x SWTU2 switch
1 x SERVO HOLDER
1 x Oracover CARBON Metalic 1 m
1 x Oratex Yellow Cub 10 m
1 x PROFICOVER 5m
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x Carbon fiber rod 20 mmx1000 mm
1 x Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x Towing hook <3m
2 x Towing hook
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Ply-Span 450x600/13g Black
1 x Neck strap Double V2
1 x Ply-Span 450x600/13g Red
1 x Oracover Yellow CUB 2 m
1 x Oracover Black 2 m
1 x Fixed launching hook
2 x Carbon fiber rod 7.0 mmx1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
2 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Tray for FUTABA 18 SZ
1 x Windsock Ozone L - 700 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x 22m Fitting barb
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
2 x Carbon fiber flat 1000x3.0x0.13 mm
1 x TX-Tray V1 (L) (Red)
1 x Oracover White 10 m
1 x Carbon fiber rod 14 mmx1000 mm
1 x Oracover Black 10 m
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Towing hook
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Transmitter Balancer Futaba T-10CG
1 x Squared carbon wing joinner 5x5x220 mm
1 x Oracover ROYAL RED 2m
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 8.0x100x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Balsa panel 10x100x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Round Rod 1,25x1000 mm
1 x Opale Rucksack
1 x Handle for PERMAGRIT lime
1 x SyRen 10A 6V-24V Regenerative Motor Driver
4,687.94EUR
Manufacturers
Manufacturer Info
Other products
Languages
Español English
Currencies