54.90EUR

GPS Logger Dymond
[DY0319173]


The DYMOND GPS Logger is a compact and versatile device to fly with model, logging GPS-related data that can be recorded and evaluated. Data are calculated such as speed, altitude and track length. The most important values can be read directly on the device, so you e.g. can find out directly how fast the model was at maximum or how high it flew. On the PC, then the motion data can be visualized as a path in a map.

- Compact and easy to carry
- Speed meter with top speed memory
- Max. altitude
- GPS Coordinator
- Built-in 4M flash (recording time: 6 hours)
- UTC timestamp logged for each track point
- Built-in rechargeable, LiPo bettery 200mAh (Operating time: 150 minutes)
- Support both Metric and Imperial system of measurement
- PC link for data logging & google map
- Firmware upgradable

Specs:
- 32 channels
- Size: 65,7 x 39,6 x 20,8 mm
- Weight: 41 g
- Update frequency: 1 Hz
- Sensitivity: -159 dBm
- Temperature range: 0 - 50° C


few units
few units

Reviews

Customers who bought this product also purchased
20x200 mm battery rings
20x200 mm battery rings

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x DPS Switch Ampere
2 x Cabel charger transmitter GRAUPNER
1 x Connector Sub-D 2+5 Male
2 x Dean "T" - Futaba Adapter
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
3 x 2 LiPo XH>EH adapter
3 x 4 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x DPS Switch JR/JR
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x CC 03
1 x 3 LiPo XH>EH adapter
3 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Cabling for Fox MDM1 wings
2 x Copper lacquer wire Ø0,2 mm (5 m)
3 x 5 LiPo XH>EH adapter
2 x Connector CAN 15
2 x Circlick securite
1 x CC 02
1 x BEC 3A FOXY
2 x "S" set for boats
1 x "M" set
1 x Ventral support for AX-18/AX-60
2 x Parachute expulsion foam
1 x White smoke canister 100 g
2 x Smoke set "S"
1 x Blue smoke canister 100 g
1 x Green smoke canister 140 g
2 x White smoke canister 65 g
1 x Initior Transmitter FTX2 Wireless
1 x Initior Receiver FRX2 Wireless
1 x 3l Smoke oil
1 x "S" set for planes
1 x White smoke bombs AX-9 (10 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
2 x Smoke set "Glider"
1 x Smoke set "M"
2 x Red smoke canister 65 g
1 x Black smoke bombs AX-60 (5 pcs)
1 x White smoke bombs AX-18 (5 pcs)
2 x Remote electric ignition system
1 x B4-0 rocket charges (6 pcs)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Blue smoke canister 140 g
2 x Yellow smoke canister 100 g
2 x AX-60 starters (5 pcs)
1 x CM-3
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Angle measurer
1 x WingFix ULTRA Black Edition
2 x CC 05
1 x Adapter lead MPX/EC3
1 x Field folding model stand
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x 30 cm BEC cable (female)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x EasyFLY Addon
1 x Interface Jack Adapter IKARUS
1 x Cinta Goldfix 1m
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20x200 mm battery rings
1 x SE Ring 330 mm (4 pcs)
1 x 
1 x Foil for sticking flaps and ailerons
1 x SE Ring 300 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Wing connector 8pin with pin strip, plug & socket
1 x Connectors banna oro 3,5 mm (M/F)
1 x XH female balance (3S) connector (2 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Gold antispark 4 mm plug
1 x XH male balance (3S) connector (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 8,0 mm (M/F)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna gold 5,5 mm (M/F)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors DEANS (T)
1 x XH female balance (2S) connector (2 pcs)
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna oro 0,8 mm (M/F)
1 x XH male balance (5S) connector (2 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Extinguisher CO2 - 2 Kg
1 x Premium servo extension 100cm
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension silicon 10 cm (Graupner)
1 x Small aluminium horn red (2pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x White smoke bombs AX-3 (10 pcs)
2 x PSC 6
1 x White smoke bombs AX-60 (5 pcs)
1 x Yellow smoke canister 65 g
1 x AX-60 starters (5 pcs)
1 x Red smoke canister 140 g
1 x White smoke canister 140 g
1 x Green smoke canister 100 g
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Double conector with JR adapter and 200 mm extension
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Extension 2/3 lipos JST/C
1 x TP/TopFuel - XH 2/3S Adapter
2 x Extension 2/3 lipos JST - JST/C
1 x Extension 5 lipos JST - JST/C
1 x XH male balance (2S) connector (2 pcs)
1 x Conector Servo female 4 pines
1 x Female connector for 10 pines AWG
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Angle of incidence meter
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x UHU hart 35 g
2 x SE Ring 360 mm (2 pcs)
1 x Marker ties (20 pcs)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x 
1 x Mounting frame MPX male connector
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x SE Ring 450 mm (2 pcs)
1 x MPX housing with flange (4 pcs)
1 x Glass Bubbles (0,12 g) 350 ml
1 x FOAM - CURE™ (24g)
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Screwdriver for Hexagon 1,27mm
1 x Vacuum pump 12 CFM
1 x Crimping tool
1 x Ball Link Plier
1 x Hot Glue Stick BLACK
1 x Cut tube
1 x Hot Glue Stick RED
1 x Digital scale up to 40 kg
1 x AXI 2814/10 V2 Long
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Protector Connector MPX (1 pair)
6,314.95EUR
Manufacturers
Manufacturer Info
Other products
Languages
Español English
Currencies