Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Long pinned hinge (12 uds)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	18 mm reinforced hinge
2 x	Gates hinge 30x16 mm (2 pcs)
1 x	15 mm reinforced hinge
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Large flex hinge (12 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Miniature brass strap hinge, 1 m
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	GameCommander USB Universal
1 x	EasyFLY Addon
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	2,4x1000 mm 2:1 red termoretract tube
2 x	Tape GFK 38 mm
2 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Tape GFK 25 mm
2 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	100m servo "Premium" wire (white/red/blue)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
2 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Conector JR Servo male (10 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
2 x	Conector JR Servo male (50 pcs)
1 x	Conector BEC female (10 pcs)
1 x	30 cm MULTIPLEX female connector
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Adapter lead MPX/EC3
1 x	5 LiPo XH>EH adapter
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	DPS Switch JR/JR
1 x	CC 01
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	BEC 3A FOXY
1 x	Connector Sub-D 2+5 Male
1 x	DPSI Ampere battery backer
1 x	Connector Sub-D 2+5 Female
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (female)
1 x	Adapter lead MPX/XT60
1 x	CC 03
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Small Crow DLE-170M
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Big Crow DLE-170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	20 g tin paste
1 x	Universal Colour Paste deep black 250 g
2 x	Spray EC Red 400ml
1 x	Silent-blocks DLE 170M
1 x	Release wax 250ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	PARTALL® Hi-Temp Wax, 340 g
2 x	Spray adhesive AEROFIX 2
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Universal Colour Paste deep black 50 g
1 x
1 x	Universal Colour Paste white 50 g
1 x	1/6 Pilot "John"
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Short ball link M3 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Small pinned hinge (12 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Flap hinge (6 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Small flex hinge (12 uds)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Suncover 100cc Red
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Cinta Goldfix 1m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Jeemo Dolly
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Cable Cargador FUTABA
1 x	50m servo "Premium" wire (white/red/blue)
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 360 mm (2 pcs)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	SE Ring 330 mm (4 pcs)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	Extension MPX-MPX 20 cm
2 x	XH male balance (9S) connector (2 pcs)
2 x	Bag connector 2 mm
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	AXI 2204 Multicopter
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	MR30 connector female
1 x	Conector JR Servo female (50 pcs)
1 x	XH male balance (6S) connector (2 pcs)
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	XH female balance (8S) connector (2 pcs)
1 x	MR30 connector male
1 x	Soporte carbono MR30 (2 pcs)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Split M1,2x10 (10 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Giant Scale Muffler D.A. 70
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	ZEUS F3A 2m
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x	Connectors MPX male (PIN double)
1 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	XH male balance (4S) connector (2 pcs)

10,078.74EUR