119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
3 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Double conector with JR adapter and 200 mm extension
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x CC 05
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Dean "T" - Futaba Adapter
2 x CC 02
1 x Connector Sub-D 2+5 Male
2 x Circlick securite
2 x 2 LiPo XH>EH adapter
2 x APM2.6 Power module with 5.3V DC BEC
3 x 4 LiPo XH>EH adapter
1 x 5 LiPo XH>EH adapter
1 x Connector Sub-D 2+5 Female
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x BEC 3A FOXY
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Cabel charger transmitter GRAUPNER
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Connector CAN 15
2 x CM-3
1 x Cabling for Fox MDM1 wings
2 x CC 01
1 x 30 cm BEC cable (male)
2 x 30 cm BEC cable (female)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 3 LiPo XH>EH adapter
2 x TrainerCord (master-learner)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x CC 03
2 x RF9 Flight Simulator with Spektrum Controller
2 x Slave-cable USB Easy Sim
2 x GameCommander USB Universal
2 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Towing hook <3m
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x DPSI Ampere battery backer
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Extension silicon 50 cm (Graupner)
1 x DPS Switch JR/JR
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x 290 mm 8x4 M4 shaft ship
1 x VIPER JET G2 Esq. 2 White/Red
1 x Motor RACE 20 Navy 12v
1 x SCHARNHORST Battleship 1:200
1 x 270 mm 3/3 mm shaft ship
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x 36,0 mm propeller (rigth propeller)
1 x SkyMaxx 1.550 mm (kit)
1 x 10 mm portholes (10 pcs)
1 x 290 mm M4/4 mm Prop shaft
1 x 42,0 mm propeller (left propeller)
1 x Tirpiz Battleship 1:200
1 x TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x 28 mm turnbuckle
1 x 10 mm dogdrive props
1 x Motor ACTRO 28-3-1300
1 x 29,0 mm propeller (rigth propeller)
1 x ESC Actro-Marine 30A
1 x VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x 31,0 mm propeller (rigth propeller)
1 x FANTASY ARF 3.2m
1 x Albatros ,spare fuselage (Top Model)
1 x Extinguisher CO2 - 2 Kg
1 x Aero-Master Fuselage (Aero-naut)
1 x Fascination 3600 mm ARC
1 x Interface Realflight Simulator
1 x Gracia (Top Model)
2 x Fournier RF-4D
1 x Q-12 X-light 2000 mm Electric
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Gracia Maxi ARF, bags (Top Model)
1 x Stickers-digit for marking
1 x Xplorer2 anemometro
2 x Interface Jack Adapter IKARUS
1 x Aero-Master Cabine (Aero-naut)
1 x SIMtransmitter 6 Mode 2
1 x Albatros red/white (Top Model)
1 x ALBATROS 3.0 m (orange/white)
1 x IKURA 4.0 m
1 x ENIGMA ARF
1 x Albatros ,spare cockpit (Top Model)
1 x Aero-Master Wings (Aero-naut)
1 x Avia spare blue cockpit (Top Model)
1 x Xplorer1 anemometro
1 x FIALA Propeller 19x12 Electric
1 x Crystal Universal TX 35.140 Ch 74
12,135.14EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies