1 x | |
1 x | Servo NARO Max Std |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Starter EM Gear Power 80 |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Extension MPX-MPX 20 cm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Crimping tool |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Gates hinge |
1 x | Miniature brass strap hinge, 1 m |
1 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Blue smoke canister 140 g |
1 x | Extension 7.5 cm |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Extra long horn 60x30 |
1 x | PPM Encoder Module |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Challenger ARF (Top Model) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Fox MDM 1 4000 mm Std. |
1 x | LS-8 GFK 6m Glider |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Fournier RF-4D |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Support ECU Xicoy X-45 |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | IKURA GPS 4.28 m |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | GRAFAS MAXI ARF |
1 x | Cable coupler M2 (10 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Astra (Top Model) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Hovercraft sailcloth |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Servo HITEC HS-311 |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Servo AN-20 MGBBA |
1 x | Servo HITEC HS-485 HB |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Futaba 2x20 mm servo double arm |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Futaba 38 mm servo arm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | SERVO DES 658 BB MG |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Threaded coupler M3 (10 uds) |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Servo HITEC HS-325 BB |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | ALU double servo arm 3 mm shaft |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | SERVO DES 707 BB MG |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Servo MKS 6100 DS |
1 x | Servo HITEC D951 TW |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Servo HITEC D85 MG |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC D131 MW nano |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Carbon plate 350x150x2.0 mm |
|
18,037.66EUR |