Top » Catalog » Hardware » Chargers » Chargers » iCharger » ROIJS137172

440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]

Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)

Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST MS825 V8.0 35kg 8.4v
84.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	15 mm floating pad (30 pcs)
3 x	10 mm floating pad (72 pcs)
2 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
3 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Blind nut M5 (10 pcs)
3 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
2 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Aluminium wide washer M4 Gold (4 pcs)
4 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
3 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Blind nut M6 (4 pcs)
2 x	12 mm floating pad (49 pcs)
1 x	Blind nut M2 (10 pcs)
2 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Blind nut M8 (10 pcs)
2 x	Blind nut M3 (4 pcs)
2 x	Blind nut M6 (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
2 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	20x200 mm battery rings
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Cinta Goldfix 1m
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	1/12 Pilot "Cougar"
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	1/6 Pilot "Garry"
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Pilot JAN 1/4 Saiplanes
1 x	SE Ring 240 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Servo M2x5/16 screw (4 pcs)
1 x	Tape GFK 38 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Pan Head Screw M2x8 PH
1 x	1/10 Pilot "Jack"
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
2 x	1/4 Pilot "Mike"
1 x	1/6 Pilot "Tony"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
1 x	1/4 Pilot "Heidi"
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Foil for sticking flaps and ailerons
2 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Xplorer1 anemometro
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Lock nut aluminium M2 (4 pcs)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	SE Ring 200 mm (2 pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Lock nut M4 (10 pcs)
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	1/6 Pilot "Buddy"
1 x	Nylon Screw M5x30
1 x	Marker ties (20 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Nylon Screw M4x20
2 x	SE Ring 360 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	SE Ring 250 mm (2 pcs)
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Pilot "Anthony" (Slimline)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	1/7 Pilot "Japanese"
2 x	Lock nut M2 (10 pcs)
2 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Piloto JET 1:3,5
2 x	Lock nut M5 (10 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	1/12 Pilot "Langley"
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Field folding model stand
1 x	Propeller balancer
1 x	800TVL CMOS camera for FPV
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	80 mm rods set for direction control
1 x	Cable grommet Ø 5 mm (4 uds)
2 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	100 mm rods set for direction control
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Flap hinge (6 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Lock nut M2.5 (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	18 mm reinforced hinge
1 x	Lock nut M5 (20 pcs)
1 x	M3 black washers (4 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Floating M4 washer pad (36 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Lock nut M6 (10 pcs)
1 x	25 mm reinforced hinge
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Lock nut M2 (20 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	15 mm reinforced hinge
1 x	Lock nut M3 (10 pcs)
1 x	Blue Aluminium lock nut M4 (4 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	1/6 Pilot "John"
2 x	1/12 Pilot "Fighter"
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Civilian pilot "Joe" size 9cm (Slimline)

2,380.21EUR

Manufacturers

Notifications

Notify me of updates to Jun-Si iCharger 4010 Duo

Reviews

Write a review on this product!

Languages

Currencies

Insurance

440.00EUR

Jun-Si iCharger 4010 Duo[ROIJS137172]

under request

Jun-Si iCharger 4010 Duo
[ROIJS137172]