430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x CC 02
2 x Connector Sub-D 2+5 Female
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CC 01
1 x BEC 3A FOXY
1 x 3 LiPo XH>EH adapter
1 x CC 03
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x CM-3
1 x Cabel charger transmitter GRAUPNER
1 x 4 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x Connector CAN 15
1 x 30 cm BEC cable (female)
1 x 2 LiPo XH>EH adapter
1 x CC 05
2 x Connector Sub-D 2+5 Male
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x UBEC 6A KAVAN
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Dean "T" - Futaba Adapter
1 x Circlick securite
1 x Male connector for 20 pines AWG
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x SPARK Switch 7.4v
1 x EWC3 100 cm wing connector
1 x Female connector for 10 pines AWG
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Female connector for 12 pines AWG
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Double conector with JR adapter and 200 mm extension
1 x JETImodel Addcap 1640
2 x EWC3 40 cm wing connector
1 x Female connector for 20 pines AWG
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x Three-position switched channel, short
1 x EWC6 40 cm wing connector
1 x SPARK Switch 12v
1 x Female connector for 6 pines AWG
1 x DPS Switch JR/JR
1 x Hacker X-Pro USB interface V2
1 x Male connector for 10 pines AWG
1 x Short Switch On/Off micro
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Male connector for 12 pines AWG
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Hovercraft sailcloth
1 x 20x200 mm battery rings
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened threaded rod M2-1m
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Male connector for 6 pines AWG
1 x Horn 5/20 with M2 Bearing
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Ball link M3 RPA's-UAV's
1 x ABS angle 1.5x1.5x1000 mm
1 x Interruptor SPS 70v 60/120A
1 x SPARK Switch 5.9v
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Support Flush MPX Conector (6 pcs)
1 x Propeller POWER-PROP 7x7
1 x FX three-position switched channel, long
1 x Micro Switch button
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1,232.06EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies