430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Cockpit plastic closing
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Cabin latch Fox MDM1 4m (pair)
1 x Steering arm 16 mm Ø 4 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x SUS wire 3m (nylon coated)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Covered closure or fairings
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Conector MR-60 (pareja)
1 x Adaptadores carga 6s JST-XH
1 x Starter EM Gear Power 80
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Extractor piñones 2.3/3.2 mm
1 x Xplorer3 anemometro
1 x Small pinned hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Flap hinge (6 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Micro flex hinge (12 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x 15 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
2 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Motor A2212/13T
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna gold 5,5 mm (M/F)
1 x Conector BEC male (10 pcs)
1 x XH female balance (3S) connector (2 pcs)
1 x Connectors banna oro 3,5 mm (M/F)
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Gold antispark 5,5 mm plug
1 x XH male balance (5S) connector (2 pcs)
1 x Conector Servo female 4 pines
1 x Optotronix Aurora Plug
1 x XH male balance (3S) connector (2 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x XH male balance (2S) connector (2 pcs)
1 x 2 mm female connector (2 pcs) with safety connector
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x XH male balance (4S) connector (2 pcs)
1 x Connector CAN 15
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x XH female balance (2S) connector (2 pcs)
1 x Connectors banna oro 3 mm (M/F)
1 x Connectors banna oro 4 mm (M/F)
1 x MPX Sub-D Adaptor
1 x XH female balance (4S) connector (2 pcs)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Futaba Female 40 cm extension
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Spannlack 1000 ml
1 x Propeller POWER-PROP 15x10
1 x Propeller electric carbon 9.5x7
1 x Propeller electric carbon 10x7
1 x Cockpit aluminium closing 5.4g
1 x Cable grommet Ø 4 mm (4 uds)
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Ply-Span 450x600/13g Yellow
1 x Split M1,2x10 (10 pcs)
1 x Propeller POWER-PROP 13x9 Izda
1 x DUPLEX 2.4EX Central Box 210
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Propeller POWER-PROP 14x9
1 x Motor SAITO FG-61 TS
1 x LA500 pilot-seat set
1 x Xplorer1 anemometro
1 x Xplorer4 anemometro
1 x LA500 housing-lower cyclic
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Nut M2
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Balls 4 mm
1 x Cierva C30 Elevator
1 x Servo GO-1013 MG 3.8kg
1 x Servo DITEX TD2612S
1 x Turbina KINGTECH K320 G5
1 x Servo GO-1053 MG 20.0kg
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Servo DITEX EL0510M
1 x Crimping tool
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Aspen
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x 18 mm reinforced hinge
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x Long pinned hinge (12 uds)
1 x Turnbuckle M2x29/43 (2pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
9,924.58EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies