7 x | Thundertail (RBC Kits) |
1 x | Adjustable launching hook |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Crystal RX 35.030 Ch 63 |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 5 mm Prop Adapter M8 |
2 x | Jet Pipe for ASPIRE 2m JMF |
1 x | |
1 x | 45 mm white plastic spinner for fixed propeller |
2 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Bags wings/rudder ASPIRE |
1 x | Adapter 3,2 mm M6 |
1 x | |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Switch Cap M (black) |
1 x | Fixed launching hook |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Smoke set "M" |
1 x | Receiver bed (Blue) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | 4 mm Prop Adapter M6 |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
2 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 1,5x50 mm allen screwdriver |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
2 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Parachute XTRALITE S |
1 x | Cable coupler M2 (10 uds) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Teacher-student connector T12FG/FX-30 |
1 x | Adapter 3,2 mm M8 |
1 x | Propeller CFK 12X6 |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | Crystal RX 35.140 Ch 74 |
2 x | DIVA cabin cruiser |
1 x | Micro Crystal RX 35.070 Ch 67 |
1 x | Avanti S 2.3m Jet WHITE/BLUE (SebArt) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Propeller CFK 15x15 |
1 x | Adap/Exten for Futaba 12-14C |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Futaba Neckstrap |
1 x | "S" set for planes |
3 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | GRAFAS MAXI ARF |
1 x | Cable coupler M2 (10 uds) |
2 x | Towing hook <3m |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
2 x | Plastic caps for AIR BURTS (30 pcs) |
2 x | USB Mini Camera endoscope |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Dust collector for mould cleaning |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Micro Crystal RX 35.890 Ch 189 |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | White smoke bombs AX-18 (5 pcs) |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | MZ-10, 5 Channel HoTT |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | 12x8 tree blades propeller |
1 x | Propeller CFK 11x8 |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Propeller CFK 15x13 Slim |
1 x | Electric Landing Gear GALEB G4 |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | 2,3 mm Prop Adapter M6 |
1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
1 x | 10 mm Prop Adapter M12 |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Propeller RF CFK 14.5x14 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | PRO-HV Dual Action Valve |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Micro Crystal RX 35.160 Ch 76 |
1 x | Field folding model stand |
2 x | Copier 5x20 cm pcs |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | 90x60 mm standart servo cover |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Allen wheel collar M4x4 |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | ODYSSEY Porsche ARF 2190 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | 50x45 mm micro-mini servo cover |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Propeller CFK 18x17 |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Propeller balancer |
1 x | Long ball link M3 (6 uds) |
1 x | Mini AVANTI S EDF 80MM RTF |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Strut Set SUPER GALEB G4 (without wheels) |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | OPUS-V / Jet-CC-BF |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Glases Stratus |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Oil FUCHS 1 liter |
1 x | Astra wing Joinner (Top Model) |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | Check valve V2 |
1 x | DLE 111 Carb gasket (V1) |
1 x | Spring clamp for tube Ø50 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Jet Pipe 40N-80N (200 mm) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Distanzstück motor OS 120 AX |
1 x | Oratex Natural White 2m |
1 x | ODYSSEY Blue ARF 2190 mm |
1 x | Telemetry SPEKTRUM |
1 x | Bidule 111 3000 mm Canopy |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | SWTU2 switch |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Spinner plastic white fixed propeller 30 mm |
1 x | Propadapter for motor A60-V2 |
2 x | DJI Mavic Air Fly More Combo |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Ball link M3 (6 uds) |
1 x | Horn for flap control (1 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Glases Moritz |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Stickers-digit for marking |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Xplorer3 anemometro |
2 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Yellow silicone 0,5 qmm wire (50 m) |
2 x | ASPIRE Red ARF 2.000 mm |
2 x | Extension silicon 25 cm (Graupner) |
2 x | Spinner plastic white fixed propeller 51 mm |
2 x | Vest clothes Hispano Aviación |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | Short adjustable control horn 3x24 |
2 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Long pinned hinge (6 uds) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Starter Sullivan-STAR 601 |
1 x | Spark motor OS nº 3 |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Cockpit plastic closing |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | CA Glue fast 20g |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Gold antispark 4 mm plug |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Nitroverdu 500 ml |
1 x | Horn with ball 55x40 |
1 x | 13 mm wing servo holder |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Ball link M2 (10 pcs) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | White large kwik link (10 pcs) |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Red smoke canister 65 g |
1 x | MZ-18, 9 Channel HoTT |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Futaba F14 Twin Boat Stick |
1 x | Shirt Hispano Aviación |
1 x | Ply-Span 450x600/13g Blue |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Dean "T" - Futaba Adapter |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Pendulun "Special" to tank 60g |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | Tailormade cone A-10 Skymaster |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Telemetry JETI |
1 x | EME 55 cc carburetor WALBRO |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | "Taxi Tank" Fuel Tank |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Compact on-board starting system (9715) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | AX-60 starters (5 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | Ferrita 27x14x7 mm |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Spinner INOVA 102 mm Black |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Futaba Multi-Switch 16 MODUL |
1 x | Indoor hinge with servo arm integraded |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Tape GFK 50 mm |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Opale Rucksack |
1 x | Long ball link M2 (6 uds) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 1/12 Pilot "Tom" |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Straightened threaded rod M2-1m |
1 x | CC 02 |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Filler Gauges |
1 x | Module 2.4GHz T-FHHS "F" Series |
1 x | ORACOVER Fluor red (2 m) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Blue smoke canister 140 g |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Baseplate servo |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | RC Power Switch 5A |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Electric Landing Gear ODYSSEY |
1 x | Nut for 515/518/519 spinner special for Hacker |
1 x | ODYSSEY Navy ARF 2190 mm |
1 x | Electron 22 mm Fitting barb |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Horn 6/20 with M3 Bearing |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Hose clips 6 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | Electric Landing Gear ASPIRE |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Nose wheel 62 mm |
1 x | Small pinned hinge (12 uds) |
1 x | Wheel 22 mm |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
1 x | Dremel 3000 130W |
1 x | L ELBOW 90º ø 25 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | 6 mm M3 variable horn |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Parachute BACKUP X100 |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | 18 mm wing servo holder |
1 x | Me-163 |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Spark motor OS Type F |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | Extension Arm for Carburetor (red) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 1000 ml sealer (DOPE) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Futaba Multi-Switch 16 DECODER |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Connectors DEANS (T) micro |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 1/12 Pilot "Cougar" |
1 x | Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | Hobbylite Filler, Balsa colour |
1 x | Ply-Span 450x600/13g Orange |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 2 LiPo XH>EH adapter |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | Propadapter for motor A50-V3 |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Oracover Orange 2 m |
1 x | Ignition bed V2 Red color |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Double side nipple |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Tape GFK 38 mm |
1 x | Compact on-board starting system (9713) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Glases Aspen |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | EnLink 2RS Plus - DUO |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | 1/4 Pilot "Heidi" |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | "M" set |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Fod Guard 73x32 mm |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Bidule 55 2460 mm Cabina |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Electric Fuel pump |
1 x | Connectors DEANS (T) |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Canopy Latch |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Angle of incidence meter |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
|
65,152.38EUR |