3 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Marker ties (20 pcs) |
2 x | Horn 6/27 with M3 Bearing |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Cable control set |
2 x | Softshell Hispano Aviación |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | 25 mm reinforced hinge |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Glases Aspen |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Glases Ace |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Tape GFK 38 mm |
2 x | Cable with accesories |
1 x | SE Ring 450 mm (2 pcs) |
3 x | Large flex hinge (12 uds) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Tape GFK 25 mm |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | RH long aluminium horn (2pcs) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Small aluminium horn gold (2pcs) |
3 x | Cap Hispano Aviación |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Horn with ball 40x30 |
2 x | Optotronix Aurora Plug |
3 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | ASK 21 6.5m + pylona |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
3 x | Glases Moritz |
1 x | Extension 100 cm (Futaba) |
1 x | Shirt Hispano Aviación |
3 x | Extension silicon 50 cm (Graupner) |
1 x | Micro flex hinge (12 uds) |
2 x | SHK 4000 mm Scale 1:4.25 |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 350 mm (2 pcs) |
2 x | MultiLog Altimeter |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Telemetry interface ALTIS to Futaba |
1 x | LS-8 GFK 6m Glider |
2 x | Device Terminal |
1 x | SE Ring 400 mm (2 pcs) |
1 x | VBar NEO |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Cockpit plastic closing |
3 x | 800TVL CMOS camera for FPV |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Extension silicon 25 cm (Graupner) |
2 x | Set of buckles and strap, 1:4 scale. |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | One touch canopy lock |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Extension silicon 75 cm (Graupner) |
2 x | Set Altimeter SHRead |
1 x | Cinta Goldfix 1m |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Motor OS 3820-1200 electric |
1 x | Connectors DEANS (T) |
2 x | Ventus 2cx 4.5 m |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Gold antispark 5,5 mm plug |
2 x | Fournier RF-4D |
1 x | Tape GFK 50 mm |
2 x | Angle measurer |
1 x | Keypad ALTIS V4 |
1 x | Swift S1 De-luxe 3.730 mm |
2 x | Allen wheel collar M3x3 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
3 x | Allen wheel collar M3x5 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Telemetry interface ALTIS 20 cm |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Altimeter Altis NAO |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
3 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | 5 mm Prop Adapter M8 |
1 x | Adapter 3,2 mm M6 |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Motor ORBIT 20-12 with coolingfan |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | SE Ring 300 mm (2 pcs) |
1 x | de Havilland Vampire (Rc Factory) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | 2 mm Prop Adapter M5 |
1 x | Quicklock washer 3.5 mm (10 pcs) |
4 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
3 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Adapter 3,2 mm M8 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Allen wheel collar M4x6 |
1 x | 100 mm rods set for direction control |
1 x | BALSA triangular 10x10x1000 mm |
1 x | F-100 Super Sabre (RBC Kits) |
1 x | 4 blades set |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | A/C quality beech plywood 498x247x2.0 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Astra wing Joinner (Top Model) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | 34 mm Alu spinner 4 mm pleg. propeller |
1 x | Canopy Sweet / Siesta |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | DC Small for MultiLog & UltraLight |
1 x | Straightened threaded rod M2-1m |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Propeller balancer |
1 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Mini Avanti S 1.4m white/red |
1 x | Cut tube |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Canopy Astra |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Glases Stratus |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Antenna Hole Cap V1 (Silver) |
2 x | ZG231cc SHL |
1 x | Bidule 111 3000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Switch moment button, 2 functions, long FUTABA |
3 x | Flat washer 3.2 mm (20 pcs) |
2 x | Field folding model stand |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Tail tube RAINBOW |
1 x | ACTIVE ARF Electric 1.995 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Spinner 55 mm White (Kavan) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Glases Nimbus "Black" |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Motor rotor LA-500 |
2 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
2 x | |
1 x | Glases Flitemaster |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
2 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | 60 mm aluminium spinner (Kavan) |
1 x | 3,0x60 mm allen screwdriver |
1 x | USB Mini Camera endoscope |
1 x | Landing gear strap medium (4 uds) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Skyray (RBC Kits) |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Small aluminium horn blue (2pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Adap/Exten for Futaba 12-14C |
1 x | ZENOAH G270RC |
1 x | Pushrod octagone 4/3 |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | M3 Maxi ball link (2 uds) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cabling for Fox MDM1 wings |
1 x | Dust collector for mould cleaning |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Screws M1,6x6 Allen |
1 x | Snap for floding prop for 2 mm axi |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Copier 2x20 cm pcs |
1 x | Spinner 60 mm White (Kavan) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | LA500 nose |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Ferrita 14x8x5.5 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | TA-183 "HUCKEBEIN" (RBC Kits) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | LUNAK 4,00 m |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Wheel keeper washer |
1 x | Raer wall |
1 x | Swift S1 De-luxe 3.140 mm |
2 x | |
1 x | SIG Coverall 1.2x4.5 m |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Servo Fork |
1 x | Central support Speed 600 |
1 x | 6 mm Prop Adapter M8 |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Fuel Dot (Black) |
2 x | Allen wheel collar M4x4 |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Dremel PERMAGRIT thin lime |
1 x | Antenna holder bracket double |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Servo SAVOX SV-1273 TG |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Combo lighting module with covering drop shape |
1 x | LA500 cyclic central part |
1 x | Fuel Dot (RED) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Angle of incidence meter |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | LA500 Blades |
1 x | Metal ball clevis M3 (10 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Silencer Ring 7-35 |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | F9F Panther (Aero-naut) |
1 x | Field folding model stand SebArt |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Conector Servo female 4 pines |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Glases Nimbus |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | 7 mm gas motor standoff |
1 x | Motor Advance 30-10 F3A |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | XPower XC4226/12 LS |
1 x | GRAFAS MAXI ARF |
1 x | Rafale C (Aero-naut) |
1 x | 11 mm wing servo holder |
1 x | Connector CAN 15 |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | SAGITA Alsema 4.0 m |
1 x | EC-Cutter |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | Motor holder for AC 28/7 |
1 x | 24x10 prop Super Silence |
1 x | Complet landing gear |
1 x | Hawker Hunter (RBC Kits) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Landing gear strap large (4 uds) |
1 x | Electric coversion set |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Mudguard for 140/165 mm wheels |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Selfstarr EME35 |
1 x | Spinner 60 mm Black (Kavan) |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Nut M1,6 |
1 x | Gold antispark 4 mm plug |
1 x | Round Rod 1.0x3.5 cm |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | LA500 housing-upper cyclic |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | MPX housing with flange (4 pcs) |
1 x | QUANTUM II 55 Brushless Motor |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
1 x | Circlick securite |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | XT-60 connector (female) |
1 x | Window mounting channel 5m |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | MPX Sub-D Adaptor |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | DPSI RV Mini 5 Magic |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Astra (Top Model) |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Sparkplug Saito 400 |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | Head Gasket 30cc (3 pcs) |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Servo FUTABA BLS175 SV |
1 x | Nut M2 securing |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Dia. 15x25 mm tefon tube for escape |
1 x | Fan for A60 |
1 x | Fox MDM 1 6000 mm |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Fuel dot Gold color |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Titan 2.8:1 reduction gear, inline |
1 x | Spark Plug BRISK M14x1.25 |
1 x | Gobe R-26S (Airwold) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | ZENOAH ZG 62 SL |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Compact on-board starting system (9715) |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Receiver bed (Blue) |
1 x | MIG 29 EDF |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Conector BEC female (10 pcs) |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | EWC6 40 cm wing connector |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
2 x | Spinner 40 mm Black (Kavan) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fueling valve "Air" |
1 x | Q80-8M V2 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | GPS Altis |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Head lower part |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Fiberglass motor-holder for electric motors |
1 x | Reed valves with doubler, set for DA 85/100/120 |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Motor A10-7 L 4,4:1 |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | PROMETHEUS 50E White/Blue/Red |
1 x | Extender tip (6 pcs) |
1 x | Q-12 X-light 2000 mm Electric |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | DLE 111 pipe plug |
1 x | ZENOAH/ZG 20cc |
1 x | ExtraCA Top |
1 x | DPSI Pin Switch Actuator |
1 x | DPSI Ampere battery backer |
1 x | Vasa model Catapult |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | SAVOX SH 1250 MG servo digi |
1 x | XT-90 connector (pair) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Round Rod 3,0x1000 mm |
1 x | Glases Innovation Plus |
1 x | Angled clevis with threaded rod M3 |
1 x | White smoke canister 140 g |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Ball link M2 (10 pcs) |
1 x | Dremel 3000 130W |
1 x | Heli blades angle measurer |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
|
51,338.71EUR |