800.00EUR

Motor DLE 120 cc
[ROIDLE120]


Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust—more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance.

Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance-fueled confidence.

Features:
•Efficient, light design for a high power-to-weight ratio
•Light pistons for fast acceleration, excellent compression and low vibration
•CNC-machined parts for high performance and long life
•Sealed crankshaft bearings
•Improved piston and cylinder contact area for increased engine lifespan.
•Matched mufflers included for optimized power
•Two mufflers
•Electronic ignition module with spark plugs
•Standoffs
•Spiral wire wrap

Specifications:
Displacement: 120.0 cc (7.3 cu in)
Bore: 1.85 in (47 mm)
Stroke: 1.38 in (35 mm)
Total Weight: 6.13 lb (2781 g)
Output: 12 hp @ 7,500 rpm
Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Suggested Propellers: 26 x 10, 26 x 12, 27 x 10, 28 x 10

DLE-120 Technical Data:
Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
Gas/Oil Mix: 30:1
Replacement Spark Plug: DLEG1326
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
Weight Breakdown: Engine: 5.08 lb (2306 g), Muffler 1: 3.6 oz (103 g), Muffler 2: 3.9 oz (111 g), Ignition Module: 5.3 oz (149 g); Miscellaneous: 4 oz (112 g)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x PPM Encoder Module
1 x PIX Hawk with accesories
1 x Tube Pitot to PIXHAWK
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Profile ABS half cane 2.5x1000 mm
1 x 500 ml sealer (DOPE)
1 x Universal Colour Paste deep black 250 g
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Plasti Dip Liquid Tape 429 ml black
1 x PARTALL® Hi-Temp Wax, 340 g
1 x U Profile ABS 8,0x4,0x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Partall paste 650 g
1 x Spray adhesive AEROFIX 2
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Spray EC Red 400ml
1 x Release wax 250ml
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Profile ABS Square 1 x 1000 mm
1 x Universal Colour Paste white 50 g
1 x Presto SF Light Filler styrene-free (420 g)
1 x Cross Connector 4.0 mm x 1000 mm
1 x Spray Graphit 33
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Wing connector 8pin with pin strip, plug & socket
1 x XH male balance (4S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x XH male balance (5S) connector (2 pcs)
2 x M3 Maxi ball link (2 uds)
1 x Long ball link M2 (6 uds)
1 x M3 Maxi ball link (2 uds)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Joint with bearing M2 22x5,5
1 x Short ball link M1.6 (6 uds)
1 x Ball link M2,5 (10 pcs)
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Ball link M3 (6 uds)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Blue metalic ball link M3/3 azul (2 pcs)
2 x Ball link M3 (10 pcs)
2 x Horn 16,5x20 mm (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Horn 6/20 with M3 Bearing
1 x Horn 13,5x16 mm (2 pcs)
1 x 6 mm aluminium horn with patella
2 x Horn 5/15 with M2 Bearing
1 x 6 mm red aluminium threaded horn with patella
2 x LH long aluminium horn L31xH30 (2pcs)
1 x Horn for flap control (1 pcs)
1 x Horn 5/20 with M2 Bearing
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x 20 mm carbon horn
1 x Horn 6/27 with M3 Bearing
1 x RH long aluminium horn (2pcs)
1 x Horn with ball 40x30
1 x Brass control horn M2 short for wire (2 pcs)
1 x SlowFlyer control horn (3 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Small aluminium horn blue (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Cable control set
1 x Cable with accesories
1 x Brass control horn M3 short for wire (2 pcs)
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Horn with ball 55x40
1 x Starter EM Gear Power 80
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Copier 5x20 cm pcs
1 x Starter EM Gear Power 250
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Digital precision scale up to 2000 g
1 x Ball Link Plier
1 x 2,5x60 mm allen screwdriver
1 x Z Bender - S Type Tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Digital scale up to 40 kg
1 x Hot Glue Stick RED
1 x Z Bender - S Type Tool
1 x 3,0x60 mm allen screwdriver
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Ball Link Plier
1 x Dust collector for mould cleaning
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Screwdriver for Torx® TX6
1 x 
1 x 2,0x50 mm allen screwdriver
1 x Starter 12v (Max 90 and 15ccm)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Suncover 100cc Red
1 x TAKEO 3.6m electric
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x Motor OS 3820-1200 electric
1 x ASW 15 5000 mm (Airwold)
1 x Fox 4000 mm with flaps (Airwold)
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x LO 100 ARC 3.3m,cabina
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x LS-8 GFK 6m Glider
1 x ASH 31 Mi Scale:1/3 - 7m
1 x Small aluminium horn gold (2pcs)
1 x Rubber profile 10-2 mm 2M
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Hot Glue Stick GREEN
1 x PROXXON - SAW BLADE 8MM 0ZI220E
1 x ABS angle 10,0x10,0x1000 mm
2 x Rubber profile 6-2 mm 2M
1 x Profile ABS half cane 7.0x1000 mm
1 x Conector JR Servo male (10 pcs)
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Conector MR-60 (pareja)
1 x Conector XT-30 (hembra)
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Conector JR Servo male (50 pcs)
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x Rubber profile 8-2 mm 2M
1 x Profile ABS half cane 8.0x1000 mm
1 x XH female balance (6S) connector (2 pcs)
1 x MR30 connector female
1 x DA 70 Twin Gas Engine
1 x Motor DLE 111 cc
1 x ESC 40A. Opto starter Kolm
1 x Motor UMS Radial-5-150cc gas
1 x 7 mm gas motor standoff
1 x ZENOAH ZG 26SLH Helicopter Engine
1 x Motor DLE 120 cc
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Motor DA 60
1 x Motor DLE 55 cc
1 x Castrol Oil A747 1l
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Motor DA 120
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
30,824.29EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies