Top » Catalog » Hardware » Wing Joiner » R74141311-S

28.34EUR

Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
[R74141311-S]

Wing-connector with GRP + CRP tube

The Wing-connector system consists of one GRP wing joining tube (outside) and one CRP wing tube (inside), they are high quality made and accurately fitting. The GRP tube fits completely over the CRP tube, the wing-connector is therefore telescopic.

Carbon fiber semi-finished tube - light weight, high strength, excellent corrosion and heat resistance and electrical conductivity. High quality epoxy resin matrix

Dimensions:
- GRP tube (outside tube) outer-Ø (oder outside diameter) 13.7 mm, wall thickness 0.6 mm
- CRP tube (inside tube) outer-Ø (oder outside diameter) 12.5 mm, wall thickness 0.9 mm

- Tolerance: ca. ± 0.3 mm
- Weight: approx. 113 g

Application:
Wing-connector system for big model airplanes, e.g. it is used to plug the wings onto the fuselage.

This system can only be delivered complete, the individual tubes are not available.

under request

Reviews

Customers who bought this product also purchased

28 mm tailwheel unit under request	Nylon hinge 15x0,3 (10 pcs) under request	Straightened rod Ø 4.0 mm x 1000 mm under request
Horn 16,5x20 mm (2 pcs) under request	Tailwheel for 1-3 kg models under request	Cockpit plastic closing under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	PIX Hawk with accesories
1 x	PPM Encoder Module
1 x	Tube Pitot to PIXHAWK
1 x	30 cm BEC cable (female)
2 x	BEC 3A FOXY
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	MPX-Dean "T" Adapter
2 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	4 LiPo XH>EH adapter
1 x	Dean "T" - Futaba Adapter
1 x	Adapter lead MPX/XT60
1 x	3 LiPo XH>EH adapter
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	5 LiPo XH>EH adapter
1 x	CC 02
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TrainerCord (master-learner)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CM-3
1 x	CC 03
1 x	2 LiPo XH>EH adapter
2 x	30 cm BEC cable (male)
1 x	Cabel charger transmitter GRAUPNER
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	JETImodel SINGLE BEC
2 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Blue smoke canister 100 g
1 x	AX-60 starters (5 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	Remote electric ignition system
1 x	3l Smoke oil
1 x	Yellow smoke canister 140 g
1 x	Yellow smoke canister 65 g
1 x	"S" set for planes
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	SUS wire 3m (nylon coated)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Covered closure or fairings
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	3,0x60 mm allen screwdriver
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Motor DLE 200cc Premium Muffler
1 x
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	1/12 Pilot "Fighter"
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	DPS Switch JR/JR
1 x	Cabling for Fox MDM1 wings
1 x	CC 01
1 x	USB interface ALTIS
1 x	Circlick securite
1 x	Male Prolonger TP 4/5S
1 x	Extension 5 lipos JST - JST/C
1 x	USB HLS prog. interface
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Spare Part Frame Set for EACHINE RACER 250
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Green smoke canister 100 g
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Red smoke canister 100 g
1 x	Clip mini fixing for wing (2 pcs)
1 x	Canopy Latch
1 x	250 mm / 16 mm Airbrakes
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Electric rocket starters (6 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)

4,341.40EUR