1 x | Round Rod 6,0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
3 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 5,0x1000 mm |
3 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
3 x | Round Rod 2,5x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | ABS Strip 1.0x3.0x1000 mm |
3 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Catalog AERO-NAUT 2016 |
2 x | Extinguisher CO2 - 2 Kg |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Gear for D 54 |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Anchor 50 mm (2 uds) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Motor DLE 40 cc Twin |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | 1/6 Pilot "Buddy" |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Windsock Ozone L - 700 mm |
1 x | Oracover Green10 m |
1 x | Glases Nimbus |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Propeller balancer |
1 x | Gold antispark 5,5 mm plug |
1 x | Servo NARO Max Std |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Hitec 30 mm servo rounded arm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Canopy Latch |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Strip 2,0x2,0x330 mm |
1 x | 500 ml sealer (DOPE) |
1 x | SERVO DES 707 BB MG |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Cable coupler M3 (10 uds) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Servo MKS HV1220 |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Futaba 20 mm servo arm |
1 x | Yellow smoke canister 140 g |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Medidor ángulos y/o incidencias |
1 x | Servo HITEC D941 TW |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Race Outboard MERCURY type A |
1 x | TrainerCord (master-learner) |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | Servo KST X08 Plus 9g HV servo |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Adapter rotula M3 |
2 x | 15 mm reinforced hinge |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
2 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | MPX-Dean "T" Adapter |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | 1000 ml sealer (DOPE) |
2 x | Regulador NAVY 540R |
2 x | Aramid 50 daN 50 m |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
2 x | 800TVL CMOS camera for FPV |
1 x | Parachute BACKUP X100 |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Socket head ball link M3 (2 uds) |
2 x | Soporte metal para servos |
1 x | VBar NEO |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | 1/12 Pilot "Cougar" |
1 x | Horn 6/35 with M3 Bearing |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | 25 mm Sandpaper file |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Servo HITEC HS-485 HB |
1 x | Kwik link with arm M3xM2xL24 |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | CC 01 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Rudder tandem for two Futaba servos |
1 x | Hovercraft sailcloth |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | "M" set |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Futaba BLS152 - Upper Case |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Covered closure or fairings |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Servo HITEC HS-325 BB |
1 x | Xplorer4 anemometro |
1 x | Small pinned hinge (6 uds) |
1 x | PIX Hawk with accesories |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Sensor Ignition RCEXL Universal |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Gold antispark 4 mm plug |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Servo FUTABA BLS172 SV |
1 x | Tape GFK 38 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Extension silicon 75 cm (Graupner) |
1 x | 290 mm M5 Prop shaft |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Horn 5/10 with M2 Bearing |
1 x | Spannlack 1000 ml |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | 20 g tin paste |
1 x | Blind nut M5 (10 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Motor RACE 20 Navy 12v |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | LUCAS pilot ARTF |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Digital scale up to 40 kg |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Cockpit aluminium closing |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Servo inverter |
1 x | Tow hook for tug |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Servo Dymond D 37 Eco |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Servo FUTABA BLS173 SV |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Small Crow DLE-170M |
1 x | Hitec 38 mm servo arm with ball link |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Soporte servo KST X08/H and Plus |
1 x | Tape GFK 50 mm |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | BEC 3A FOXY |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Servo SAVOX SA-1256 TG |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
|
6,412.85EUR |