99.90EUR

Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
[FPV4140-673]


This is a mini all-in-one Sony 4140+673 CCD Board Camera with Built-in 200mw TX and Pre-soldered Circular Polarized antenna.

This CCD board adopts with SONY newest generation image processing technology Enhanced Effio-eSuper. The high horizontal resolution up to 700TVL is performanced as well as unique 2D-DNR technology significantly improve the low-light environment with better image quality. Powerful OSD menu includes Brightness, Contrast, Saturation adjusting functions; Multi-area, White Balance, AGC, and other functions ensure clear bright pictures.

CCD Specifications:
- Model: SONY 4140+673
- DSP+CCD: CXD4140GG+D5148GG+673
- Exposure: Electronic exposure
- Image Sensor: 1/3 Sony 960H CCD Sensor
- Signal System: PAL/NTSC
- Pixels : PAL: 1020H× 596V (610000 pixel) NTSC: 1020H× 508V (520000 pixel)
- Effective Pixels: PAL: 976H× 582V (570000pixel) NTSC: 976H× 494V (480000pixel)
- Definition: 650/700TVL(BW) 650/700TVL(BW)
- Minimum illumination: 0.01Lux/F 1.2
- Video Output: 1.0Vp-p75Ω
- Sync: Internal Synchronization
- Shutter speed: 1/50(1/60) ~1/100, 000(s)
- AGC(automatic gain control): +18dB maximum
- Gain Control: Auto
- DNR (Digital Noise Reduction): 2DNR Support 0~15 16 grade adjustable
- Wide dynamic: Digital wide dynamic 0-60
- OSD: support
- Automatic gain control: 0.25/0.50/0.75/1.00
- Aperture control: yes
- Backlight compensation: HLC / Backlight Compensation
- Backlight compensation: Auto
- SNR: 52dB(minimum) / 60dB(Maximum)(AGC automatic closing)
- Gamma correction: 0.45/1.0
- White Balance: On / OFF switch
- Power: DC12V± 5%
- Ambient temperature: -20 ~ +60
- Size: 25×25

TX Features :
- Frequency: 5.8G wide-band FM video/audio tx
- Transmittion Power: 200mw 23dbi
- 24 Channels
- Sterieo audio: L/R audio channel
- Full format PAL / NTSC.
- PAL CCD default standard , ( NTSC need to customize the CCD 672 )


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x 41x5,5 mm wires output (2 pcs)
1 x Nitroverdu 500 ml
1 x Universal Colour Paste deep black 250 g
1 x 1/6 Pilot "Tony"
1 x Pilot JAN 1/4 Saiplanes
1 x Plasti Dip Liquid Tape 429 ml black
1 x Hobbylite Filler, Balsa colour
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Spannlack 1000 ml
1 x 1/10 Pilot "Jimmy"
1 x 1/6 Pilot "Garry"
1 x 1/6 Pilot "Cindy"
1 x 1/6 Pilot "John"
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Solvent Plasti Dip 1000 ml
1 x 100 mm rods set for direction control
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cable grommet Ø 4 mm (4 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x 40 mm 5-BL (rigth hydropropeller)
1 x 140 mm rods + T patellas set for direction control
1 x 28x5 mm wires output (2 pcs)
1 x 90 mm rods + T patellas set for direction control
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x 45 mm rods set for direction control
1 x Cable grommet 9.5 mm (4 uds)
1 x Allen wheel collar M4x6
1 x 28 mm tailwheel unit
1 x 39,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x PROFI TX fastening rings
1 x 100 mm rods + T patellas set for direction control
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x 31 mm M4 carbon hydro-propeller (left hydropropeller)
1 x 1000 x 2 mm steel wires
1 x 32.5 mm M4 Race propeller (left hydropropeller)
1 x Cabin latch Fox MDM1 4m (pair)
1 x 38x4,5 mm wires output (2 pcs)
1 x 40,0 mm 3-BL M4 (rigth hydropropeller)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Canopy Latch
2 x Aluminium alloy coupler for carbon tube 6/M4
1 x 32x1,5x5 mm waterlight linkages (2 pcs)
1 x 4 mm diameter silicone tube(int)
1 x Support hands Issuer PROFI TX
1 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Paramotor BackPack XXS 2
1 x Ventus 1:4 set of instruments
1 x Wheel collar 2 mm Ø (4 uds)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x DES Servo accessory
1 x Flat Connector 4.0 mm x 1000 mm
1 x Ring 320 mm length (5 pcs)
1 x ABS Strip 1.5x6.0x1000 mm
1 x 800TVL CMOS camera for FPV
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Strip 1,5x1,5x330 mm
1 x Arnes cruzado Confort de Luxe PROFI
1 x Steering arm 12 mm Ø 3 mm
1 x 60,0 mm carbon hydro-propeller (rigth hydropropeller)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Hawker Hunter TopRC Model + Electric Landig gear scale + SW-140
1 x Rubber profile 6-2 mm 2M
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 55,0 mm 3-BL M4 (rigth hydropropeller)
1 x 2012 Aero-naut Catalog
1 x Allen wheel collar M3x3
1 x A/C quality beech plywood 600x300x4.0 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Lead with adhesive (2 pcs)
1 x Snap pin for micro clevis (10 uds)
1 x Me-163
1 x A/C quality beech plywood 600x300x2.5 mm
1 x Camera ECO Fly Cam One V2
1 x 50,0 mm propeller (rigth propeller)
1 x 35,0 mm propeller (left propeller)
1 x Electro Propeller 9x5 (Graupner)
1 x Corporal of the marine M 1:36
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x Balsa panel 6.0x100x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Angle measurer
1 x Landing gear axle 4x21 4 mm (2 uds)
4,128.34EUR
Manufacturers
Languages
Español English
Currencies