Top » Catalog » Gas. Motor Paramotors » ROIDLE200STD

2,500.00EUR

Motor DLE 200cc Std
[ROIDLE200STD]

This engine is not toy. For your own safety, please read the manual carefully before operation. DLE is not responsible for all injuries result from the use.
Thank you for purchasing the DLE engine. DLE200 is a opposed cylinder 2-stroke engine designed for paramotor and UAV. It has unique feature with light weight, long life, high power and low vibration. The design of DLE200 does not use the tuned pipe by routine. It improves the engine's power limit and extends the life of the engine with excellent throttle respond and curve. DLE200, with its new design, will offer you unexpected flight experience.
This engine is not a toy! Therefore, all users who are not specifically skilled or trained to perform the operation or flight should stop the dangerous action and be performed following the help of the experienced.
Misuse or inaccurate maintenance may result in damage of engine, injury or death. Installation, trial run and maintain of the engine must be carried out by experienced. DLE will not be liable for any damage or death caused by misuse or inaccurate maintenance.
This is not a certified aircraft engine. User assumes all risk of use and acknowledges by his use that he knows the engine is subject to sudden stoppage. DLE will not be liable for any damage or death caused through the sudden stoppage in the air.
This engine does not have product liability insurance. We cannot assure the nonoccurrence of the engine failure. Using the engine can be dangerous and accidents can result in serious property loss, injuries or death! Never start the engine if you don't want to take the risks.

Type 2 stroke
Bore 55mm
Stroke 42mm
Displacement 200CC Power ( Premium Muffler ) 23HP/8000rpm
( Standard Muffler ) 20HP/7500rpm
Compression Ratio 10:1
Reduction ratio 1:2.7
Transmission Type Belt
Starting Type Electrical Start
Net Weight (without muffler) 10.3 Kg
Standard Muffler Weight 1.1 Kg
Premium Muffler Weight 2.2 Kg
Spark Plug DLE-8A
Petrol 93# 、97#
Alternator Output 14V 1A
Premium Alternator Output 14V 4A
Propeller 1220mm Applicable Pilot Weight (Premium Muffler) 120Kg
Applicable Pilot Weight (Standard Muffler) 80Kg

under request

Reviews

Quick Find

Shopping Cart

2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Carbon fibre sandwich sheet 350x150x3 mm
2 x	Aluminium sheet 500x250x0,5mm
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Buy Perforated film 145 cm / 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
3 x	800TVL CMOS camera for FPV
2 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Buy Perforated film 100 cm / 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x	ARAMID honeycomb 1300x2600x2 mm
3 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Buy Perforated film 100 cm / 10 m
2 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	USB Mini Camera endoscope
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x
1 x	Tape GFK 50 mm
1 x	Ring 320 mm length (5 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 350 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring 450 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Tape GFK 38 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	20x200 mm battery rings
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
2 x	Stickers-digit for marking
1 x	Small Crow DLE-170M
1 x	Silent-blocks DLE 170M
1 x	Motor DLE 430 cc - Paramotors
1 x	Motor DLE 170 M- Paramotors
1 x	Big Crow DLE-170M
1 x	Motor DLE 200cc Std
1 x	Motor DLE 200cc Premium Muffler
1 x	Double conector with JR adapter and 200 mm extension
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	"S" set for boats
1 x	Smoke set "M"
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Extension silicon 25 cm (Graupner)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Glases Innovation Plus
1 x	Glases Moritz
1 x	2,3 mm Prop Adapter M5
1 x	2 mm Prop Adapter M5
1 x	5 mm Prop Adapter M6
1 x	6 mm Prop Adapter M8
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Carbon plate 350x150x1.5 mm
2 x	Fiberglass plate 350x150x1.5 mm
1 x	Chopped glass fibre strands 3 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Carbon plate 550x350x1.0 mm ECOTECH
2 x	Styrene plate 320x120x0.5 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
2 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Chopped glass fibre strands 3 mm
1 x	Suncover 100cc Red
1 x	Carbon plate 350x150x4.0 mm
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon plate 350x150x3.0 mm
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Glass fibre sleeve Ø 20 mm X 20m
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	Ventus 1:4 set of instruments
1 x	Reed valve for DA 50-R
1 x	SE Ring 200 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 02
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	4 LiPo XH>EH adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Female connector for 6 pines AWG
1 x	PSC 5
1 x	Extension 2/3 lipos JST/C
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Release film 100 cm x 50 m
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Fiberglass plate 350x150x3.0 mm
1 x	FUNRAY RR
1 x	IKURA 4.0 m
1 x	Albatros red/white (Top Model)
1 x	IKURA GPS 4.28 m
1 x	ASG 32 560 mm
1 x	Extension 5 lipos JST - JST/C
1 x	30 cm BEC cable (female)
1 x	Crystal RX 35.120 Ch 72
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	3.2 mm Prop Adapter M6

25,060.12EUR