| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Servo NARO Max Std |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 2 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Xplorer4 anemometro |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Hot Glue Stick RED |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Xplorer2 anemometro |
| 1 x | Ball Link Plier |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | PIX Hawk with accesories |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | Connectors DEANS (T) |
| 1 x | Covered closure or fairings |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
| 1 x | Suncover 100cc Red |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | Indoor landing gear set |
| 1 x | Metal ring front FEMA |
| 1 x | |
| 1 x | Hose connector stopper 4 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Fail Safe air retract |
| 1 x | Nylon gear block Ø 5 mm (2 uds) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | 40 mm air cylinder |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | 51 mm INO spinner (carbon imitation) |
| 1 x | Charger SKY RC D200 neo |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Connectors MPX female |
| 1 x | 89 mm INO spinner (carbon imitation) |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Partall paste 650 g |
| 1 x | Spinner 90 mm GFK |
| 1 x | 89 mm aluminium spinner. |
| 1 x | 102 mm aluminium spinner |
| 1 x | 90 mm CFK long Spinner fixed by a central screw |
| 1 x | 76 mm aluminium spinner. |
| 1 x | 82 mm aluminium spinner. |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | Xplorer3 anemometro |
| 1 x | Spinner 80 mm GFK |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Spinner 102 mm |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Spinner 105 mm GFK |
| 1 x | F3A carbon 95 mm spinner |
| 1 x | bavarianDEMON USB cable |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
| 1 x | Fod Guard 73x32 mm |
 |
| 7,278.87EUR |
