Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001101

29.50EUR

Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
[R1001101]

Epoxy Resin L and Hardener L 40 min. (1 Kg) 715g Resina / 285g Hardener

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

under request

Reviews

Customers who bought this product also purchased

Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll under request	Servo HITEC HSB-9380TH under request	Stainless steel cable Ø 0.5 mm (10 m) under request
Epoxy FINISH-CURE™ 20 min (130g) under request	Fuel tank fiberglass Easy Jet 2,2 l under request	Spinner 100 mm CFK under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Motor DLE 200cc Premium Muffler
2 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
2 x	Big Crow DLE-170M
1 x	Fournier RF-4D
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	1/10 Pilot "Jimmy"
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Carb Carrier, red DA-150L/170
2 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Set cintas unión paracaídas 145 cm
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Cylinder Gasket set for DA-60 / DA-120
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Blade holder upper
1 x	Smoke set "Glider"
1 x	Screw M3x16
1 x	Conector Servo female 4 pines
3 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Bird (Aero-naut)
1 x	"M" set
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Red smoke canister 140 g
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	DA-50R motor alumine support
1 x	1/6 Pilot "Cindy"
1 x	1/4 Pilot "Mike"
1 x	SIMtransmitter 6 Mode 2
3 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Jeti Black cap
1 x	Exhaust gasket DA-150
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	Ventus 2cx 4.5 m de Luxe
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Motor D.A. 200 Magnesium
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Crankcase gasket DA 170
2 x	ABS 500 x 400 x 2,0 mm (white)
1 x	2,3 mm Prop Adapter M5
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Servo-V-Limiter 5.2V
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Paramotor BackPack XXS 2
1 x	Film release agent PVA 25 ml
1 x	SHK 4000 mm Scale 1:4.25, V-Tails
1 x	ALU servo arm 3 mm shaft
1 x	Green smoke canister 140 g
1 x	SSPS105 Super Hi-Power servo
1 x	Xplorer1 anemometro
1 x	Conector JR Servo female (10 pcs)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Set of buckles and strap, 1:4 scale.
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Motor DLE 200cc Std
2 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Fiberglass 5000x1100 mm 49 g/m²
1 x	Swift 5050 mm (Airwold)
1 x	Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	19 mm 2:1 black termoretract tube
1 x	1/6 Pilot "Garry"
1 x	VIPER 1.7 Electric break wheels + structure
1 x	DG-303 ACRO 3750 mm, canopy
1 x	Buy Perforated film 100 cm / 20 m
1 x	AXI 2814/12 V2
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
3 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Parachute P4
1 x	Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA
2 x	Small Crow DLE-170M
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Spray Graphit 33
1 x	Tow hook for tug
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Xplorer2 anemometro
1 x	Propeller MEJLIK 16x11 3 Blades
1 x	Aluminium sheet 500x250x0,5mm
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Windsock Ozone L -1200 mm
1 x	Connectors DEANS (T) micro
2 x	Fiberglass plate 350x150x0.5 mm
1 x	Conector JR Servo male (10 pcs)
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Parachute BACKUP X100
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	LS-8 GFK 6m Glider
1 x	Servo Fork
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	AXI 2820/12 V2 Long
1 x	Head core
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	MAX pilot ARTF
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Rocket D3-P
2 x	ORACOVER Ferrari red (2 m)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Ball joint long
1 x	Motor DLE 170 M- Paramotors
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Power Box GPS Sensor III
1 x	Cap Hispano Aviación
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	1/12 Pilot "Tom"
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Balls 4 mm
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	AXI 2814/20 V2
1 x	DPSI OCP Overload protection
1 x	DPSI LR-S (with push buttons)
1 x	Styrene plate 320x120x1.0 mm
1 x	2 piece mounting frame Battery 3200 / 4000
1 x	Z-shaped servo mount
1 x	Xplorer3 anemometro
1 x	30 cm DEANS female connector
1 x	Front axi for DA85/DA100/DA100L/DA120
1 x	AXI 2814/6D V2
1 x	Carbon plate 700x550x0.5 mm
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Motor B40-10 L
1 x	AXI 2217/12 V2
1 x	AXI 2820/12 V2
1 x	Softshell Hispano Aviación
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	1/12 Pilot "Cougar"
1 x	Motor B50-14 S
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Foam plastic plates (310x210x2 mm)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	4 blades set
1 x	Servo MKS HV6130
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Conector JAPAN G2 Set 5 pares
1 x	Servo Dymond D 37 Eco
1 x	1000 ml sealer (DOPE)
1 x	Fox MDM 1 4000 mm DeLuxe
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke
1 x	M3 Maxi ball link (2 uds)
1 x	Parachute expulsion foam
1 x	LO 100 ARC 3.3m,frame canopy
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	ORACOVER Fluor red (2 m)
1 x	Axle for motor A50-L
1 x	ASPIRE Red ARF 2.000 mm
2 x	3 mm Long Prop Adapter M5
1 x	Filter Capacitor JR
1 x	Fiberglass plate 620x540x3,2 mm
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Motor A60-5XS V4 28-pole kv420
1 x	Tape GFK 38 mm
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Tank GFK Opus/JEt 300 ml
1 x	SE Ring 300 mm (2 pcs)
1 x	Gasket, from reed valve carrier to carb carrier DA-150L/170
1 x	Motor A50-16 S V4
1 x	Canopy Latch
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 13x10 Electric
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	X-RAY Micro QR (Tail Tube)
1 x	X-RAY Micro QR
1 x	Mini DART 2 F3K carbon light 1m Green
2 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	Canopy Astra
2 x	Canopy Sweet / Siesta
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	Medidor ángulos y/o incidencias
2 x	Surface Indicator Gauge Small
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	Glider Ka 7 Red (2540mm)
1 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	Propeller balancer
1 x	Lunak ARF 2000 mm Yellow (Hacker Model)
1 x	Swift ARF 2000 mm Red (Hacker Model)
1 x	THERMIK XL 4000 mm
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover White 10 m
1 x	Antenna 50 mm (2 uds)
1 x	Oratex Red Fokker 10 m
1 x	Oratex Natural White 2m
1 x	Oracover Yellow CADMIO 2 m
1 x	Oracover ROYAL RED 2m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover Yellow CUB 2 m
1 x	Ply-Span 450x600/13g White
1 x	PROFICOVER 5m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover Green10 m
1 x	Oratex White 2m
1 x	Oracover Azul Cielo 2 m
1 x	Ply-Span 450x600/13g Black
1 x	Oracover Red 2 m
1 x	Oracover CHROME 2m
1 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Blue
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Stickers-digit for marking
1 x	Ferrita con funda
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita 27x14x7 mm
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	DG-303 ACRO 3750 mm, winglets
1 x	Electric spoiler 185 mm (2 pcs)
1 x	TAKEO 3.6m electric
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Field folding model stand
1 x	SF260 SIAI MARCHETTI 50E red/white (SebArt)
2 x	ASG 32 560 mm
1 x	Pilatus PC-21 50E, GLOW set conversion (SebArt)
1 x	Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt)
1 x	DC-3 Douglas (DAKOTA) 1800 mm
1 x	DC-3 Douglas (White/Blue) 1800 mm
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Chili F3K 2 wing servo mounted
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Couple M4 for wire (10 pcs)
1 x	3 mm Short Prop Adapter M5
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Adapter 3,0 mm M6
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Rudder 36x60 mm
1 x	Ventilador (metal dorado) 15 x 34 mm, 2 piezas Ø 15 mm x 34 mm a
1 x	Spare Shaft Ø6mm L:450mm M5
1 x	Rudder 30x49 mm
1 x	Ventilation grid 17x62 mm (5 uds)
1 x	Blind nut M6 (4 pcs)
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Nut for mounting M3 (4 pcs)
1 x	Interface Realflight Simulator
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Soporte barandilla madera 16 mm (10 pcs)
1 x	Soporte barandilla madera 10 mm (10 pcs)
1 x	Soporte con aro 17 mm (10 pcs)
1 x	Soporte barandilla madera 8 mm (10 pcs)
1 x	Propeller APC 16x8 Glow/Gas
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Sheave Pl. 2R. 3 mm
1 x	Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g

50,345.21EUR