4,200.00EUR

Turbine MAMMOTH 25.4 Kg
[JCMAMMOTH25]


Description:
The JET CENTRAL TURBINE ENGINES are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

Specifications:
- Thrust: 25,49 Kg (56 Lbs.) @ 108,000 RPM
- Idle Thrust: 0.82 Kg (1.8 Lbs) @ 28,000 RPM
- RPM Range: 28,000-108,000 RPM
- Weight: 2.28 Kg (4.9 Lbs) with starter
- Diameter: 124.1 mm (4.881 inches)
- Length: 325.4 mm (13.74 inches), with starter
- Exhaust Temperature: 500°C-750°C (932°F - 1292°F)
- Fuel: Jet A1, 1 -K Kerosene, Diesel
- Fuel Consumption: 0.8 Lt/min (28.5 oz/min) @104,000 RPM; 0.5 Lt/min (17 oz/min) Average
- Lubrication: 2.5% Turbine Oil mixed In the fuel
- Maintenance Interval: 25 hours




temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
PWC6 PowerWingConnector for 6 servos with fuselage socket
PWC6 PowerWingConnector for 6 servos with fuselage socket

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 20x10
Propeller MENZ-S 20x10

temporarily out of stock
temporarily out of stock

Connectors banna oro 2 mm (M/F)
Connectors banna oro 2 mm (M/F)

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 22x8
Propeller MENZ-S 22x8

temporarily out of stock
temporarily out of stock

MPS Gas-Cap-Powerswitch
MPS Gas-Cap-Powerswitch

temporarily out of stock
temporarily out of stock

Propeller APC 8x4 Electric
Propeller APC 8x4 Electric

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Gates hinge aluminium (1 pcs)
1 x Optical RPM Sensor
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x DYNAMOMETER S-1580
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Glases Ace
2 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
2 x Nylon hinge 15x0,3 (10 pcs)
2 x Micro flex hinge (12 uds)
3 x Nylon hinge 20x15x0,3 (10 pcs)
2 x Flap hinge (6 pcs)
2 x 25 mm reinforced hinge
3 x Miniature brass strap hinge, 1 m
1 x Large flex hinge (12 uds)
1 x 18 mm reinforced hinge
1 x Glases Stratus
1 x Small pinned hinge (12 uds)
1 x Glases Moritz
1 x Fast'n EZ-CA-Hinge (12 uds)
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Piloto JET 1:3,5
1 x Pilot JAN 1/4 Saiplanes
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 1/10 Pilot "Jack"
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 1/12 Pilot "Cougar"
1 x 1/4 Pilot "Mike"
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/6 Pilot "John"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Bag connector 2 mm
1 x Connectors banna oro 2 mm (M/F)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Connectors banna oro 4 mm (M/F)
1 x Connector CAN 15
1 x Conector XT-30 (macho)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Conector MR-60 (pareja)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector JR Servo female (10 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x Conector JR Servo female (50 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Conector JR Servo male (10 pcs)
1 x Conector XT-30 (hembra)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Premium Muffler
1 x Small Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
1 x Motor DLE 200cc Std
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Parachute PV6 for F3J
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x LED wire (white - 2pcs)
1 x LED blink wire flashing (orange - 2pcs)
1 x Conector JR Servo male (50 pcs)
1 x Combo lighting module with covering drop shape
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x Conector JR Servo female (10 pcs)
1 x 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x Lense for Spotlights, 20mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Medium pin type hinge (12 uds)
2 x Straightened rod Ø 4.0 mm x 1000 mm
3 x Straightened rod Ø 5.5 mm x 1000 mm
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Indoor hinge with servo arm integraded
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
2 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Pin hinge 39x20 mm (10 uds)
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x Straightened threaded rod M3 - 1m
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Small pinned hinge (6 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Gates hinge
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened threaded rod M2-1m
1 x PIN Connector female (100 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x 1/6 Pilot "Cindy"
1 x XT60 Connector with Holder Male 2pcs
1 x 2 mm male connector (2 pcs) with safety connector
9,462.77EUR
Manufacturers
Manufacturer Info
Jet Central
Jet Central Homepage
Other products
Languages
Español English
Currencies