130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Digital Air Speed Sensor And Pitot Tube Set
1 x Tube Pitot to PIXHAWK
2 x PPM Encoder Module
1 x Turbina KINGTECH K320 G5
1 x ABS tube 16.0x14.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Starter EM Gear Power 80
1 x ABS tube 12.0x10.0x1000 mm
2 x ABS tube 10.0x8.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
2 x ABS tube 8.0x7.0x1000 mm
1 x Extension MPX-MPX 20 cm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 18.0x16.0x1000 mm
2 x ABS tube 4.0x3.0x1000 mm
1 x Adaptadores carga 6s JST-XH
1 x Conector MR-60 (pareja)
1 x Horn 5/10 with M2 Bearing
1 x Horn 6/20 with M3 Bearing
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Horn for flap control (1 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x Adjustable brass horn threaded M3
1 x Horn 5/15 with M2 Bearing
1 x Horn 5/20 with M2 Bearing
1 x Brass control horn M2 long for wire (10pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn mando long (2 pcs)
1 x 5 mm M2 variable inclined horn
1 x Cable with accesories
1 x Horn 6/35 with M3 Bearing
1 x Horn 16,5x20 mm (2 pcs)
1 x 20 mm carbon horn
1 x Brass control horn M2 large for wire (2pcs)
1 x 6 mm aluminium horn with patella
1 x 6 mm M3 variable inclined horn
1 x Cable tie mounts 4.3 (4 uds)
1 x 45 mm rods set for direction control
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Clip mini fixing for wing (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 80 mm rods set for direction control
1 x Cable grommet Ø 4 mm (4 uds)
1 x 140 mm rods set for direction control
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x 28x5 mm wires output (2 pcs)
1 x Allen wheel collar M3x3
1 x 100 mm rods set for direction control
1 x Allen wheel collar M3x5
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x 45 mm rods + T patellas set for direction control
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Allen wheel collar M4x4
1 x Canopy Latch
1 x 41x5,5 mm wires output (2 pcs)
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x Allen wheel collar M4x6
1 x 100 mm rods + T patellas set for direction control
1 x 11 mm Rubber pads (14 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Cable grommet Ø 5 mm (4 uds)
1 x 250 mm / 16 mm Airbrakes
2 x Black silicone 1,0 qmm wire (50 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 10 mm Quick clamp_L (6 pcs)
1 x Cable set PREMIUM , fuselage/wing one4one
1 x 100m servo "Premium" wire (white/red/blue)
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Black silicone 0,25 mm² wire (25 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Glases Moritz
1 x Motor OS 3820-1200 electric
1 x Tube support Ø 6mm (10 pcs)
1 x 40 mm air cylinder
1 x Retract undercarriage for gliders up to 2 Kg
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Fiberglass landing gear for 140-160
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x Wheel cover holder Ø 3 mm (2 uds)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Quick hose connector 4-4 mm
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x ABS tube 5.0x4.0x1000 mm
1 x Check valve quick hose connector 4-4 mm
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x Mobile Terminal
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x SERVO HOLDER
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Quick hose connector 3-3 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Tap FESTO 4-4 mm
1 x Fiberglass tube 6/4x1000mm
1 x Landing gear strap medium (4 uds)
1 x T-Hose connector 2-2-2 mm
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Y-Hose connector 4-4-4mm
1 x Extra long horn 60x30
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x SERVO S9177SV HV S-Bus2 Programable
1 x Programador FUTABA USB CIU-3
1 x 76x23 Ø3.5 mm aluminium core wheel
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x LASER 73" 1.85m (05) PILOT
1 x Hacker X-Pro USB interface V2
1 x Fuselage Autogyro RAINBOW
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Blade Holder Full (3 blades)
1 x Combo 4 pcs AXI 2204 Multicopter
1 x Long adjustable control horn 3x34
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Micro control horn T2 Ø 1
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x PIX Hawk with accesories
1 x Small control horn with bearing (2 pcs)
1 x XH female balance (8S) connector (2 pcs)
1 x XH female balance (7S) connector (2 pcs)
1 x Conector JR Servo male (10 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Rudder forward 70x28 "type Kato"
1 x Rudder forward 90x28 "type Kato"
1 x Indoor hinge with servo arm integraded
1 x Short extra-strong control horn with bearing 2,8x15
1 x Horns indoor
11,172.62EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies