130.00EUR

Gafas FPV Eachine EV800D
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP
A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


pocas unidades
pocas unidades

Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Tuerca autoblocante M2 (20 pcs)
2 x Conector FESTO 1/8 Quick 6mm 90º
3 x Piloto MAX ARTF
4 x Para-RC Trike "RC-Bullix"
1 x Paramotor BackPack XXS (sin accesorios)
1 x Paracaidas BACKUP X100
2 x Vela OXY 5.0 m2
2 x Paracaidas rescate "RC-Evo-Cross"
1 x Manga viento Ozone S - 700 mm
3 x Motorización Trike XL (motor+regulador+helice)
1 x Paracaídas de seguridad 1,8 m2
3 x Para-RC Mix
2 x Manga viento Ozone L -1200 mm
5 x Vela OXY 0,5 pulgadas2
1 x Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x Varilla latón Ø 0,5 mm x 1000 mm
1 x Casquillo para grimpar cable de 0,85 mm (10 pcs)
1 x Adaptador JST-XH
1 x Hélice RABOESCH M5 130 mm (4 Palas) (Hélice Izda)
1 x Chaleco Hispano Aviación
1 x Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x Cierre metalico para cabinas
1 x Tubo acero (L 1000 mm, Ø5 mm, Ø4,7 mm)
1 x Tubo ABS 6,0x4,0x1000 mm
1 x Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line
1 x Cable acero trenzado Ø 0,5 mm (10 m)
1 x Acumulador polvo para limpieza moldes
1 x Cable pull pull SUS 3m + cierres
1 x Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
1 x Bisagra Robart flaps/compuertas metal (2 pcs)
1 x Acople ALU M2,5 Ø 6 (2 uds)
1 x Plancha contrachapado Abedul 600x300x2,0 mm
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Paracaídas PV6 para F3J
2 x Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x Filtro para bomba vacio
1 x Interruptor electronico JETI SP06 Opto
1 x Electrodos de plata 55% (2 pcs)
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x CM-3
1 x Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Batería LiPo GENS 8500 mAh 2S 7,6V HV 120C
1 x Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
2 x Mochila OPALE paramodels
1 x Corona grade autoarranque DLE-170M
1 x Tubo acero (L 1000 mm, Ø3 mm, Ø2,7 mm)
1 x Clevis con trasmisión M3
1 x Cable acero trenzado Ø 1,3 mm (10 m)
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Aramid 50 daN 50 m
2 x Paramotor BackPack XXS 2
1 x Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x Bascular < 40 Kg
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Motor DLE 200cc Std
1 x Copiador 5 unidades de 20 cm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Funda plancha entelar STD
1 x Arrancador 12v (Max 90 and 15ccm)
1 x Piloto LUCAS ARTF
1 x Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x Cierre cabina V1 M3 Rojo (2 pcs)
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
1 x Paramotor Trike XL
2 x Set cintas unión paracaídas 145 cm
1 x Tubo ABS 8,0x7,0x1000 mm
1 x Servo MKS HBL599 SL
1 x Adaptador TP/TopFuel - XH 2/3S
1 x e-Looger V3
1 x Arrancador Sullivan-STAR 601
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x BEC 3A FOXY
1 x Tubo acero (L 1000 mm, Ø10 mm, Ø9,7 mm)
1 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x Tubo ABS 3,0x1,0x1000 mm
1 x Varilla acero Ø 4,0 mm x 1000 mm
1 x Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x CC 03
1 x Ferrita 14x8x5.5 mm
1 x CC 01
1 x Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x Arrancador Sullivan-STAR 603 DINATRON
1 x Tuerca para montaje M3 (10 pcs)
1 x Cable acero trenzado Ø 0,5 mm (2 m)
1 x Destornillador allen 2,0x50 mm molibdeno
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x Gorra Hispano Aviación
1 x Anemometro Xplorer1
1 x Acoplador de aluminio para tubo de carbono 6/M4
1 x Cierre cubiertas o carenados
1 x Acoplador "Z" Ø 2 (2 uds)
1 x Destornillador allen "Hex" Ø 2.0 molibdeno
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Hélice POWER-PROP 7x7
1 x Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x Acoplador M2 (10 uds)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Cable carga emisora GRAUPNER
1 x Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x Plancha carbono 350x150x5.0 mm
1 x Adaptador 4 LiPos XH>EH
1 x Brazo direccional 16 mm Ø 3 mm
1 x Varilla latón Ø 1,5 mm x 1000 mm
1 x Cable BEC 30 cm (hembra)
1 x Silent-blocks DLE 170M
1 x Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
10,945.93EUR
Fabricantes
Información del Fabricante
Roi-Import
Roi-Import Página Principal
Otros productos
Idiomas
Español English
Monedas