130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Locking cable tie 4.6x203 (uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x One touch canopy lock
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x SUS wire 3m (nylon coated)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x MPX-Dean "T" Adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CC 01
1 x 4 LiPo XH>EH adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Adapter lead MPX/XT60
1 x Cabel charger transmitter GRAUPNER
1 x JETImodel SINGLE BEC
1 x CC 03
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x 30 cm BEC cable (female)
1 x CM-3
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Dean "T" - Futaba Adapter
1 x TrainerCord (master-learner)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TP/TopFuel - XH 2/3S Adapter
1 x CC 02
1 x 5 LiPo XH>EH adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x USB HLS prog. interface
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Circlick securite
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Starter Sullivan-STAR 601
1 x 2,5x60 mm allen screwdriver
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Screwdriver for Hexagon 1,27mm
1 x Crimping tool
1 x Vacuum pump 12 CFM
1 x Starter EM Gear Power 250
1 x Vacuum pump P1-N
1 x 2,0x50 mm allen screwdriver
1 x Screwdriver for Torx® TX6
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Copier 2x20 cm pcs
1 x Hot Glue Stick RED
1 x Starter EM Gear Power 80
1 x Starter 12v (Max 90 and 15ccm)
1 x Ball Link Plier
1 x Dust collector for mould cleaning
1 x Starter Sullivan-STAR 603 DINATRON
1 x Hot Glue Stick GREEN
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 3,0x60 mm allen screwdriver
1 x Hot Glue Stick BLACK
1 x 1,5x50 mm allen screwdriver
1 x Hexagonal ball head 2.0 x 50 mm
1 x Screwdriver for Torx® TX8
1 x Screwdriver for Hexagon 1,5mm
1 x Z Bender - S Type Tool
1 x Starter 12v (Max 180 and 30ccm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Copier 5x20 cm pcs
1 x Z Bender - S Type Tool
1 x Digital precision scale up to 2000 g
1 x Absorver mount set for 5-10 Kg models
2,916.44EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies