130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Adapter lead MPX/XT60
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 2 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CM-3
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CC 05
1 x CC 03
1 x TrainerCord (master-learner)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Adapter lead MPX/EC3
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x USB HLS prog. interface
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x JETImodel SINGLE BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Dean "T" - Futaba Adapter
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Bungee HLG Premium
1 x Jeti Black cap
1 x BALSA trip 2.0x2.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Threaded coupler M2 (10 uds)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x BALSA triangular 6x6x1000 mm
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x BALSA triangular 15x15x1000 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x BALSA trip 10x10x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Beech dowels 10 mm x 1000 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Couple M4 for wire (10 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x BALSA trip 3.0x3.0x1000 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Angled clevis with threaded rod M3
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Adjustable launching hook
1 x Fixed launching hook
1 x Towing hook
1 x Tow hook for tug
4,697.60EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies