130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Buy Perforated film 100 cm / 10 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Buy Perforated film 100 cm / 50 m
1 x ABS 500 x 400 x 1 mm (white)
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x ARAMID honeycomb 1300x2600x2 mm
2 x Buy Perforated film 100 cm / 20 m
1 x Buy Perforated film 145 cm / 50 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Aluminium sheet 500x250x0,5mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Ply-Span 450x600/13g Orange
1 x Oratex White 2m
1 x Oracover Red 2 m
1 x Ply-Span 450x600/13g Blue
1 x Oratex Silver 2m
1 x MYLAR film A350 (1000x500 mm)
1 x Oracover CHROME 2m
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x ORACOVER Fluor red (2 m)
1 x Ply-Span 450x600/13g Black
1 x Oracover Azul 2 m
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x ORACOVER Ferrari red (2 m)
1 x Oratex Red Fokker 10 m
1 x Oracover Yellow CADMIO 10 m
1 x Oracover Yellow CUB 10 m
1 x Oracover Verde 2 m
1 x Oracover Yellow CADMIO 2 m
1 x ORACOVER transparent Yellow (10 m)
1 x Oracover Brown 2 m
1 x Oratex Antik 2m
1 x PROFICOVER 5m
1 x Oratex Natural White 2m
1 x Oracover Yellow CUB 2 m
1 x Ferrita 14x8x5.5 mm
1 x Ferrita 17x10x6.5 mm
1 x Ferrita 27x14x7 mm
1 x Ferrita con funda
1 x Sheet Depron Aero 1250x800x3 mm
1 x Ball Link Plier
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Screwdriver for Torx® TX8
1 x Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x 3,0x60 mm allen screwdriver
1 x Copier 5x20 cm pcs
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Panel Honeycom carbon 350x150x3.5mm
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x 2,0x50 mm allen screwdriver
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x Glass fibre braided sleeve (45mm) roll 10m
1 x Crimping tool
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Glass fabric 425 g/m² aero,10x1m
1 x Z Bender - S Type Tool
1 x Screwdriver for Torx® TX6
1 x Ball Link Plier
1 x PVC grid diagonal 290x185x0.32 mm
1 x Digital scale up to 40 kg
1 x PVC grid straight 290x185x0.32 mm
1 x Hot Glue Stick GREEN
1 x Z Bender - S Type Tool
1 x Vacuum pump P1-N
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Covered closure or fairings
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x SUS wire 3m (nylon coated)
1 x Steering arm 12 mm Ø 4 mm
1 x Canopy Latch
1 x Steering arm 16 mm Ø 4 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler M2 (10 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
5,538.75EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies