Top » Catalog » Helicopters » Accesories » Blades » SP132003

554.98EUR

Rotor blade 3Bl Scale 1050R
[SP132003]

These blades have been developed for the scale pilots. The dull black surface supports the scale look. Our logo, the three bars, was placed at the inside of the blade nearly invisible but noble, to support the scale look. These blades do have an asymmetrical airfoil and produce lift an angle of attack of 0 degree, enabling the pilot to decrease the flight rpm considerably, without losing any climb performances. The additional weight of the fuselage, lighting system and other mounting parts can be easily compensated for. These blades are available as two blades systems and in addition to as multiblades system with much smaller blade depth. The very low fl ow line combined with the more to the tip of the blade positioned center of gravity prove a very stable straight and level fl ight and optimized performance. These attributes are supporting the requirements of modern FBL Systems, for which these blades are optimized.

Needless to say, all blades are well balanced to function as one unit.

root: 14mm
bolt hole: 6 mm ca
weight/per blade: 400g
width: 100 mm
max rpm. forward: 1400
air foil: 1-3 mm
direction of rod: asymmetricalclockwise

under request

Reviews

Quick Find

Shopping Cart

1 x	45 mm aluminium spinner (Kavan)
1 x	82 mm aluminium spinner.
1 x	38 mm aluminium spinner.
1 x	50 mm aluminium spinner (Kavan)
2 x	45 mm aluminium spinner.
1 x	102 mm aluminium spinner
2 x	64 mm aluminium spinner
1 x	60 mm aluminium spinner (Kavan)
2 x	57 mm aluminium spinner.
1 x	51 mm aluminium spinner.
1 x	70 mm aluminium spinner.
1 x	95 mm aluminium spinner.
1 x	10 mm aluminium spinner (Kavan)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Servo NARO Max Std
2 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
2 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Hovercraft sailcloth
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x
1 x	Ball link Aluminio M3 (2 pcs)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Couple M4 for wire (10 pcs)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Threaded coupler M2 (10 uds)
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	L-Connector 1.0 mm x 1000 mm
2 x	Profile ABS half cane 3x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
2 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
3 x	Profile ABS Square 2 x 1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
1 x	90 mm CFK long Spinner fixed by a central screw
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	USB HLS prog. interface
1 x	2,5x60 mm allen screwdriver
1 x	Tube Pitot to PIXHAWK
1 x	Smoke set "M"
1 x	Oracover Black 10 m
2 x	Oratex Silver 2m
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Opale Rucksack
1 x	PYRO 700-56L
1 x	Esc MasterBasic 55SB
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Powerset FunJet 2 with Vectorcontrol unit
1 x	PYRO 600-11
1 x	Backmountset complete A40
1 x	Ball Bearings for motor A60-V2
1 x	KONDOR 15-92
1 x	KIRA 500-26 6,7:1
1 x	KIRA 600-16
1 x	Esc master MEZON 120 Lite
1 x	Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x	Axle for motor A30-XL V2
1 x	EDF Stream-Fan 110mm kv780
1 x	Esc MasterBasic 40SB
1 x	KIRA 600-17
1 x	KIRA 400-34
1 x	KIRA 480-43
1 x	KIRA 480-38
1 x	PYRO 750-50L
1 x	Axle for motor A20-S (3 uds)
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	76 mm aluminium spinner.
1 x	KIRA 400-39 5,2:1
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	KIRA 600-38 6,7:1
1 x	PYRO 750-50L Competition
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	Spinner 90 mm GFK
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Motor OS 3805-1200 electric
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Fiberglass tube 6/4x1000mm
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Spare screw M3 6pcs.
1 x	Spinner 115 mm GFK
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	100 mm rods + T patellas set for direction control
1 x	Spinner 125 mm GFK
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Tail wheel for 8-12 kg models
1 x	Spinner 105 mm CFK
1 x	Tailwheel for 20/60 size
1 x	Ply-Span 450x600/13g Red
1 x	Oratex White 2m
1 x	PROFICOVER 5m
1 x	Oracover Yellow CUB 2 m
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	Oracover Yellow CADMIO 10 m
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	SIG Coverall 1.2x1.8 m
1 x	PVC termo-retract battery 95 mm blue transparent (1 m)
1 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	Spinner 90 mm CFK
1 x	Motor XPower F2915/12 XLight
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Kwik link with arm M3xM2xL24
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	FesEx-Uni6 System
1 x	Rubber profile 6-2 mm 2M
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
2 x	ABS angle 10,0x10,0x1000 mm
1 x	Pulley brass 16/2 (2 pcs)
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Pulley brass 14/2 (2 pcs)
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x	Metal clevis M2,5 (10 uds)
1 x	Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x	Pulley brass 12/2 (2 pcs)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Rubber profile 8-2 mm 2M
1 x	Wing OXY 5,0 m2
1 x	MAX pilot ARTF
1 x	Ballast 700gr OPALE

9,105.64EUR