Inicio » Catálogo » Helicópteros » Accesorios » Palas » SP132003

554.98EUR

Rotor blade 3Bl Scale 1050R
[SP132003]

These blades have been developed for the scale pilots. The dull black surface supports the scale look. Our logo, the three bars, was placed at the inside of the blade nearly invisible but noble, to support the scale look. These blades do have an asymmetrical airfoil and produce lift an angle of attack of 0 degree, enabling the pilot to decrease the flight rpm considerably, without losing any climb performances. The additional weight of the fuselage, lighting system and other mounting parts can be easily compensated for. These blades are available as two blades systems and in addition to as multiblades system with much smaller blade depth. The very low fl ow line combined with the more to the tip of the blade positioned center of gravity prove a very stable straight and level fl ight and optimized performance. These attributes are supporting the requirements of modern FBL Systems, for which these blades are optimized.

Needless to say, all blades are well balanced to function as one unit.

root: 14mm
bolt hole: 6 mm ca
weight/per blade: 400g
width: 100 mm
max rpm. forward: 1400
air foil: 1-3 mm
direction of rod: asymmetricalclockwise

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
2 x	Cinta fibra vidrio 38 mm
2 x	Cinta RUDDOG proteccion calor 2m x 50 mm
1 x	Cinta SURFACE 21mm x 5m
1 x	Sistema cierre 350 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
2 x	Cinta fibra vidrio 50 mm
1 x	Soporte para aviones
3 x	Soporte para bridas de hasta 3 mm (10 pcs)
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Cinta Goldfix 1m
1 x	Medidor ángulos
1 x	Medidor angulos y/o incidencias
2 x	Cinta tubuladora (5 m)
1 x	Soporte para aviones SebArt
1 x	Carro remolque para veleros 720 x 239 mm
1 x	Medidor de incidencias
1 x	Sistema cierre baterías 20x200 mm
1 x	Cierre cubiertas o carenados
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Bisagra larga con pin metalico (6 uds)
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Arandela abierta 4.1 mm (20 pcs)
1 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Piloto civil "Gramps" tamaño 9cm (Slimline)
1 x	Bidule 55 V3 2460 mm
1 x	Prolongador silicona 100 cm (Futaba)
1 x	Horn de mando 5/15 con rótula M2
1 x	Bancada motor HACKER A50 aluminio
1 x	Batería LiPo GENS 5500 mAh 2S 7,6V 120C (Gens Ace Hard Case)
1 x	Batería LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	Batería LiPo GENS 2200 mAh 4S 14,8v 25C (Gens Ace)
1 x	Batería LiPo GENS 450 mAh 3S 11,1V 25C (Gens Ace)
1 x	Batería LiPo GENS 3300 mAh 3S 11,1v 25C (Gens Ace)
1 x	Bateria RX JETI LiIon RB 2600 7.2v
1 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Cinta fibra vidrio 25 mm
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra Micro flexible (12 uds)

2,003.15EUR