Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001452

96.75EUR

Epoxy 40 min. 4kg (Hardener)
[R1001452]

Hardener for Epoxy Resin L and Gelcoat Colourless
Hardener L is the most commonly used hardener.
New Quality: Free of nonylphenol and DETA.
Epoxy Resin L
Processing time: 40 minutes
Mixing ratio:
100 : 40 parts by weight of Resin L : Hardener L
100 : 45 parts by volume of Resin L : Hardener L
Curing time: 24 hours
Cold curing

Heat deflection temperature: 60 °C over 7 days at 23 °C. A maximum glass transition temperature (Tg) of 75 °C is possible with a post cure at 60 °C over 15 h
NEW - expertise to Epoxy Resin L and Hardener L (PDF see below). This system is not cytotoxic (cell damaging), important for applications in medical purposes!
Gelcoat Colourless
Processing time: 40 minutes

Mixing rato:
100 : 38 parts by weight Gelcoat Colourless : Hardener L
Curing time: 24 h
Cold curing
Heat deflection temperature: 60 °C over 7 d at 23 °C. A maximum glass transition temperature (Tg) of 75 °C is possible with a post cure at 60 °C over 15 h
Please order Epoxy Resin L and Gelcoat Colourless separately

temporarily out of stock

Reviews

Customers who bought this product also purchased

Silicone 0,35 qmm servos wire Futaba (100 m) temporarily out of stock	Silicone black 6,0 qmm wire (25 m) temporarily out of stock	Connectors MPX female temporarily out of stock
Fuel Station 20L temporarily out of stock	Red smoke canister 65 g temporarily out of stock	Silicone red 6,0 qmm wire (25 m) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	5 mm M2 variable inclined horn
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Adjustable brass horn threaded M3
1 x	Horn 6/27 with M3 Bearing
1 x	Horn 5/10 with M2 Bearing
1 x	Cable control set
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 6/35 with M3 Bearing
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	5 mm M2 variable horn
1 x	Control horn long w/ball
1 x	6 mm blue aluminium threaded horn with patella
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
3 x	Horn mando small (2 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
2 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Horn 6/20 with M3 Bearing
2 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Horn mando long (2 pcs)
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Extra long horn 60x30
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Horn DUBRO 1/2A
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Rudder forward 70x28 "type Kato"
1 x	Indoor hinge with servo arm integraded
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Horns indoor
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Rudder forward 90x28 "type Kato"
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Micro control horn T2 Ø 1
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	ABS tube 3.0x2.0x330 mm
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Long horn 50x26
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Optical RPM Sensor
1 x	Digital precision scale up to 2000 g
1 x	White silicone 0,25 mm² wire (25 m)
1 x	3,0x60 mm allen screwdriver
1 x	DYNAMOMETER S-1580
1 x	White silicone 0,25 qmm wire (150 m)
1 x	2,0x50 mm allen screwdriver
1 x	2,5x60 mm allen screwdriver
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	1,5x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Starter EM Gear Power 80
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Dust collector for mould cleaning
1 x	Z Bender - S Type Tool
1 x	Vacuum pump 12 CFM
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Hot Glue Stick BLACK
1 x	Screwdriver for Torx® TX6
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Z Bender - S Type Tool
1 x	Vacuum pump P1-N
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Starter EM Gear Power 250
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Nitroverdu 500 ml
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Set cintas unión paracaídas 145 cm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Motor OS 3820-1200 electric
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	3 mm Short Prop Adapter M5
1 x
1 x	Copier 2x20 cm pcs

5,728.21EUR